個人積分：27分
文章編號：70419566
[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.5, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for the NAS models supported by QTS 4.3.5:
kernel 3.10.20: TS-128, TS-228
kernel 3.2.26: TS-x31, TS-x31U
kernel 4.2.8: HS-251, SS-x79U, TS-x79, TS-x79U, TS-x70, TS-x70U, TVS-x70, TS-x31P, TS-x31P2, TS-x31+, TS-x31X, TS-x31XU, TS-x28A, TS- x35, TS-x51, TS-x51A, TS-x51U, TS-x53, TS-x53A, TBS-x53A, TS-x53B, TS-x53BU, TS-x53S, IS-453S, TS-x53U, TVS-x63, TS-x63, TS-x63U, TS-x73U, TS-x77, TVS-x80, TS-x80, TVS-x80U, TS-x80U, TVS-x82, TVS-x82S, TVS-1582TU, TS-x85, TES-x85U, TDS-16489U, TVS-x71, TVS-x71U, TVS-x73
- Due to the limitations of future kernel updates, QTS 4.3.5 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.5, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.
[Fixed Issues]
- Removing or disconnecting a disk from a RAID group during Predictive S.M.A.R.T. Migration might sometimes cause data corruption after the rebuilding.
- After users created a port trunking group, System Logs would display unexpected error messages when the NAS woke from sleep mode.
- Users could not install HybridDesk Station on the TVS-1582TU.
- Users could not resize a volume after taking snapshots on other volumes.
- The Virtual JBOD creation wizard would sometimes stop responding.
- File Station could not open PDF files after users updated QTS to 4.3.5.0713 build 20180928.
- After creating URLs for applications using Docker images in Container Station, users could not connect to the URLs in Browser Station or Virtualization Station.
個人積分：27分
文章編號：70465244
QTS 4.3.4.0734 build 20181008
[Important Notes]
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- To ensure system stability, QNAP recommends updating and then restarting QVPN Service in App Center after you update QTS to 4.3.4.
- As QTS previous versions of ARM models do not support snapshots, when you upgrade to QTS 4.3.4, the original volume cannot use this feature immediately. To solve this problem, you have to back up the existing data on your QNAP NAS to external storage. Then you can rebuild the QNAP NAS and take snapshots to the new storage pool with multiple volumes.
- QTS 4.3.4 is the final available firmware update for the following models:
TS-1269U-RP, TS-869U-RP, TS-469U-RP, TS-469U-SP, TS-869 Pro, TS-869L, TS-669 Pro, TS-669L, TS-569 Pro, TS-569L, TS-469 Pro, TS-469L, TS-269 Pro, TS-269L.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Starting from QTS 4.3.4, QNAP NAS devices no longer support creating storage pools or static volumes using NVMe PCIe/M.2 SSDs. However, this limitation does not apply to the SSDs installed in built-in M.2 slots or on QM2 expansion cards.
- Below are the kernel versions for NAS models that are supported by QTS 4.3.4:
Kernel 3.10.20: TS-128, TS-228
Kernel 3.2.26: TS-x31, TS-x31U
Kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
Kernel 4.2.8: all other models supported by QTS 4.3.4
[New feature]
- Added a shared folder backup option. This addresses a known issue in macOS High Sierra 10.13.4 and later versions that prevented QTS users from using Time Machine to back up data from their Mac to their QNAP NAS through SMB shared folders.
[Fixed Issues]
- Removing or disconnecting a disk from a RAID group during Predictive S.M.A.R.T. Migration might sometimes cause data corruption after the rebuilding.
- Undeletable snapshots would occasionally appear on certain storage pools.
- Music Station would incorrectly display the length of the last track on a list.
- Deleted files would still appear in @Recycle folders even when users disabled Network Recycle Bin.
- Certain processes would sometimes keep using CPU resources.
- RAID groups could not enter degraded mode after users took snapshots and then remove a component disk.
- The TS-x69 would occasionally stop responding after running out of memory.
- Files in a shared folder mounted on macOS via NFS would display incorrect creation dates.
- Users sometimes could not set the NAS as an additional domain controller.
- The NAS time zone would be changed to GMT +0 after users enabled LDAP Server.
- A certain snapshot-related process would use more memory resources than expected.
- A certain snapshot-related process would use more CPU resources than expected.
- QTS could not correctly display domain users' folder permissions inherited from their user groups.
- QTS would not provide relevant notifications when users could not enable Domain Controller due to the system default gateway not being correctly configured.
- General users could still access @Recycle folders even when the access to Network Recycle Bin was only granted to administrators.
- Users could not join the NAS to an Active Directory domain after enabling Domain Controller.
- Users could not create a subfolder or file in a shared folder mounted via SMB in Windows 10.
- QTS occasionally would not automatically mount volumes after the NAS restarted.
- Users could not restore file-based LUNs from snapshots.
- Snapshot restoring tasks would still run in the background even after the NAS restarted.
- It would take longer than expected to authenticate user connections to NFS shared folders.
- Users could not restore a domain controller database from a backup file on an encrypted system volume。
- Users could not save Microsoft Excel files to a shared folder mounted via AFP on macOS.
個人積分：27分
文章編號：70508153
[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.5, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.5:
Kernel 3.10.20: TS-128, TS-228
Kernel 3.2.26: TS-x31, TS-x31U
Kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
Kernel 4.2.8: all other models supported by QTS 4.3.5
- Due to the limitations of future kernel updates, QTS 4.3.5 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.5, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.
[Fixed Issues]
- Expanding thick volumes would cause longer NAS startup times.
個人積分：27分
文章編號：70869269
[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.5, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.5:
Kernel 3.10.20: TS-128, TS-228
Kernel 3.2.26: TS-x31, TS-x31U
Kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
Kernel 4.2.8: all other models supported by QTS 4.3.5
- Due to the limitations of future kernel updates, QTS 4.3.5 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.5, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.
[Fixed Issues]
- Fixed a command injection vulnerability in Media Library (CVE-2018-14746).
- Fixed a null pointer dereference vulnerability in Media Library (CVE-2018-14747).
- Fixed an improper authorization vulnerability (CVE-2018-14748).
- Fixed a stack-based buffer overflow vulnerability (CVE-2018-14749).
- QTS would sometimes still display error messages about unclean file systems even after users performed file system checks.
- Storage ＆ Snapshots did not provide enough options or clear instructions for creating iSCSI LUNs.
- Network ＆ Virtual Switch could not correctly display virtual adapters that had been created after users updated QTS to 4.3.5.0684.
- Users could not directly mount a remote NAS via FTP in File Station.
- QTS could not enter disk standby mode after users installed CloudLink.
- Checking file system for a volume during a folder migration would cause migration errors.
- QTS would display unexpected installation messages for SSD Profiling Tool when users restarted the NAS.
- When users searched for TV series in TheTVDB, Video Station could not display posters if the cast information was not available.
- Users could not expand the capacity of a volume to more than 16 TB even if the value of bytes per inode was set to 32 K.
- Users could not download data or search for torrents in Download Station after selecting a VPN connection as the gateway for Download Station in App Center.
- In Firefox, Music Station would still play the current track when users tried to skip to the next track.
- Users could not modify or delete the specified username when configuring the SMTP service account settings in Notification Center.
- In File Station, users could not mount a remote NAS that was joined to an Active Directory domain.
- Expanding thick volumes would cause longer NAS startup times.
- It would take longer than expected to open folders that contained .mp4 files in File Station.
- Users could not configure Service Binding settings after enabling VLAN for a port trunking group.
- Certain adapters would disappear from port trunking groups after users woke up the NAS from sleep mode.
- Using the Asmedia ASM1061 controller (firmware version 4.20) would cause disk errors.
- Users could only set the jumbo frame to 1500 for the QXG-10G1T network card.
- Users could not search for files in a shared folder mounted on macOS if the folder path contained spaces.
- Virtual switches would remove virtual adapters used by virtual machines after users woke up the NAS from sleep mode.
- Photo Station could not display photo tags that users added via SMB.
- myQNAPcloud would keep checking network connectivity after users disabled UPnP port forwarding.
- Resource Monitor could not display network usage for adapters where VLAN was enabled.
- Network ＆ Virtual Switch could not detect the QM2-2P10G1T expansion card after users updated QTS to 4.3.5.0728.
- Users could not set the subnet mask of an adapter to 255.255.248.0 (/21).
- Inserting a USB external device to the NAS would change the SMB shared folder access permissions to the default settings.
- Network ＆ Virtual Switch would stop responding after users set 255.255.255.255 as the netmask of a static route.
- Users could only set the jumbo frame to 1500 after installing a second network card.
- QTS could not detect the QM2-2S-220A expansion card and the M.2 SSDs installed on the card.
- Users could not open .eml files when using File Station in a new tab even if QmailAgent was installed.
- Users could not check the file system for a snapshot shared folder volume.
- Notification Center would send error messages when users downloaded files via a share link created by a non-administrator user.
- Users could not access the SQL server database after enabling Service Binding and creating a large number of virtual interfaces.
- Fan rotation speeds would increase unexpectedly after users woke up the NAS from sleep mode.
- The exFAT license could not function normally after users inserted an exFAT external drive and then restarted the NAS.
- Users could not play videos with VLC media player when using File Station in a new tab.
- Users could not play .m4a audio files in Music Station after pausing the files for a while.
- Static routes would sometimes disappear after users restarted the NAS.
- Users could not enable Domain Controller on the TS-x31 series even after configuring the default gateway.
- Users could not preview the files in Qsync folders when viewing a volume snapshot in Snapshot Manager.
- Network ＆ Virtual Switch would display unrecognizable virtual adapters after users enabled OpenVPN and installed Container Station.
- After creating a virtual switch with a port trunking group using a static IP address, users could not access QTS when waking up the NAS from sleep mode.
- Unexpected error messages about DNS registration failure would appear when users joined the NAS to a domain and enabled WINS server.
個人積分：27分
文章編號：70962350
[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.5, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.5:
Kernel 3.10.20: TS-128, TS-228
Kernel 3.2.26: TS-x31, TS-x31U
Kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
Kernel 4.2.8: all other models supported by QTS 4.3.5
- Due to the limitations of future kernel updates, QTS 4.3.5 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.5, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.
[Fixed Issues]
- Users could not change the label of an external USB drive in Storage & Snapshots.
- QNAP Network Connectivity Status Indicator (NCSI) could not function normally when users accessed the Internet in China.
- No warning messages would appear when users reached the maximum number of filters in Syslog Server.
- QTS would not save changes in the NFS host access permissions after users restarted the NAS.
- Creating a scheduled snapshot replica job without specifying a date would cause high CPU usage.
- Network & Virtual Switch would display an incorrect number of ethernet ports in the back panel drawing of TS-963X.
個人積分：705分
文章編號：70963291
個人積分：27分
文章編號：71605741
[Important Notes]
- To learn more about NAS models that support the TR-004, see the Compatibility List at https://www.qnap.com/en/compatibility-expansion
- To use a TR-004 external RAID enclosure to expand NAS storage space, the enclosure must have exactly one external RAID group. Individual disks cannot be used to expand NAS space.
- To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.6:
Kernel 3.10.20: TS-128, TS-228
Kernel 3.2.26: TS-x31, TS-x31U
Kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
Kernel 4.2.8: all other models supported by QTS 4.3.6
- Due to the limitations of future kernel updates, QTS 4.3.6 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.6, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.
[New feature]
Storage ＆ Snapshot
- Added support for using a TR-004 external RAID enclosure in NAS Storage mode to expand NAS storage space.
- Added support for using a TR-004 external RAID enclosure in External Storage mode for data transfer.
[Known Issues]
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage & Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
- A failed external RAID group may have the status "Unknown" instead of "Failed".
- When creating an external RAID partition on a TR-004 external RAID enclosure, QTS may detect the new partition and show a notification message before the creation process has finished.
- When an TR-004 external RAID enclosure is connected to the NAS, changing the enclosure's RAID configuration using the hardware Mode switch might cause the status of its external RAID group or disks to change to "Error". To resolve this issue, update the enclosure firmware to the latest version.
[Fixed Issues]
- Improved the compatibility with WD 2.5-inch My Passport 4TB external drive (WDBYFT0040BBK-0A) for the following models: TS-451, TS-651, TS-851, TS-453, TS-653, TS-853, TS-453U, TS-853U, TS-1253U.
- Fixed multiple vulnerabilities in Apache HTTP Server.
- Fixed a command injection vulnerability in File Station (CVE-2018-0730).
- Fixed multiple vulnerabilities in PHP.
- Fixed a vulnerability in Samba that could be exploited to cause CNAME loops in Active Directory DNS servers (CVE-2018-14629).
- Fixed a double-free vulnerability in Samba Key Distribution Center (KDC) on an Active Directory domain controller (CVE-2018-16841).
- Fixed a null pointer dereference vulnerability in Samba Active Directory domain controller LDAP servers (CVE-2018-16851).
- Fixed a cross-site scripting vulnerability in Storage & Snapshots (CVE-2018-0713).
- After copying files or folders from an NFS shared folder to an SMB shared folder, users could not open the copied files or folders.
個人積分：27分
文章編號：72255428
[Important Notes]
- Modified the file download and update settings for the China region.
- To learn more about NAS models that support the TR-004/TR-002, see the Compatibility List at https://www.qnap.com/en/compatibility-expansion
- To use a TR-004/TR-002 external RAID enclosure to expand NAS storage space, the enclosure must have exactly one external RAID group. Individual disks cannot be used to expand NAS space.
- To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.6:
Kernel 3.10.20: TS-128, TS-228
Kernel 3.2.26: TS-x31, TS-x31U
Kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
Kernel 4.2.8: all other models supported by QTS 4.3.6
- Due to the limitations of future kernel updates, QTS 4.3.6 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.6, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.
[New feature]
Storage ＆ Snapshot
- Added support for the QNAP TR-002 External RAID Enclosure.
Network and Virtual Switch
- Added support for QNA-T310G1T / QNA-T310G1S.
[Known Issues]
- When a TR-002 external RAID enclosure is connected to a USB 3.1 Gen2 port on the NAS, the bus type incorrectly appears as USB 3.0 in the QTS UI. This is a UI problem only, data will actually be transferred at USB 3.1 Gen2 speeds.
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage ＆ Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
- A failed external RAID group may have the status "Unknown" instead of "Failed".
[Fixed Issues]
- Fixed an improper access control vulnerability in Helpdesk (CVE-2018-0728).
- Fixed a remote code execution vulnerability in Netatalk (CVE-2018-1160).
- Fixed a command injection vulnerability in Music Station (CVE-2018-0729).
- Users could not configure SATA SSDs as spare disks for storage pools created with QM2 SSDs.
- Thunderbolt devices would not be automatically reconnected after users updated QTS.
- Users could not upload files to File Station after changing the policy for duplicate file names.
- Transferring files to the NAS via SMB would cause the memory usage to increase abnormally.
- File Station could not correctly display the colors of IIQ raw images.
- Network ＆ Virtual Switch would display incorrect adapter names after users migrated disks to another NAS.
- Snapshot Replica could not function normally when the source and destination NAS device names began with a number.
- Notification Center would occasionally display a blank and undeletable Facebook Messenger username after users completed device pairing.
- Storage ＆ Snapshots would incorrectly display the Secure Erase option for PCIe M.2 SSDs.
- Certain Network ＆ Virtual Switch processes would sometimes cause high CPU usage.
- Control Panel could not display correct domain group information after users joined the NAS to the JumpCloud LDAP.
- QTS would incorrectly display SSD Profiling Tool as "SSDLaboratory" in notification messages.
- Users could not start the NAS using Wake-on-LAN after disabling and then enabling the EuP mode.
- After users disabled IPv6 for a port trunking group, IPv6 would still remain enabled.
- Storage ＆ Snapshots would display Seagate IronWolf Health Management (IHM) test results even for disks that were not supported by IHM.
- Network ＆ Virtual Switch could not correctly display the IP address or the status of a port trunking group when DHCP was enabled.
- Users sometimes could not create files when accessing the NAS from macOS via Thunderbolt.
- Users could not create SSD cache using the SSD installed in the Slot 5 on the TS-531P.
- Users could not delete folders or files that had long paths.
- Network ＆ Virtual Switch could not correctly display the IP address list when users reserved a large number of IP addresses.
- Downgrading QTS from 4.3.6 to 4.3.4 would cause errors in the Qtier storage pool settings.
- Users occasionally could not delete files from shared folders mounted on macOS.
- Snapshot Replica jobs would stop running when users unlocked an encrypted shared folder.
- Files uploaded via File Station would have incomplete access permission settings.
- Network ＆ Virtual Switch could not display the DHCP server list when users reserved multiple IP addresses.
- The NAS sometimes could not enter disk standby mode after users enabled LDAP.
- DDNS service could not update the NAS WAN IP address after users signed in to myQNAPcloud and then changed the region settings.
- Photo Station could not create thumbnails for certain photos.
- Users could not create VMDK files on iSCSI LUNs after users updated QTS to 4.3.6.
- RAID migration from RAID 5 to RAID 6 was slower than expected.
- Certain domain controller process would cause high CPU usage.
個人積分：27分
文章編號：72359728
[Important Notes]
- Modified the file download and update settings for the China region.
- To learn more about NAS models that support the TR-004/TR-002, see the Compatibility List at https://www.qnap.com/en/compatibility-expansion
- To use a TR-004/TR-002 external RAID enclosure to expand NAS storage space, the enclosure must have exactly one external RAID group. Individual disks cannot be used to expand NAS space.
- To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.6:
Kernel 3.10.20: TS-128, TS-228
Kernel 3.2.26: TS-x31, TS-x31U
Kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
Kernel 4.2.8: all other models supported by QTS 4.3.6
- Due to the limitations of future kernel updates, QTS 4.3.6 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.6, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.
[Known Issues]
- When a TR-002 external RAID enclosure is connected to a USB 3.1 Gen2 port on the NAS, the bus type incorrectly appears as USB 3.0 in the QTS UI. This is a UI problem only, data will actually be transferred at USB 3.1 Gen2 speeds.
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage ＆ Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
- A failed external RAID group may have the status "Unknown" instead of "Failed".
[Fixed Issues]
- Users could not grant NFS host access permissions to more than one IP address after updating QTS to 4.3.6 build 20190228.
- Fixed a cross-site scripting vulnerability in Notification Center (CVE-2019-7179).
個人積分：27分
文章編號：72472689
[Important Notes]
- To learn more about NAS models that support the TR-004/TR-002, see the Compatibility List at https://www.qnap.com/en/compatibility-expansion
- To use a TR-004 external RAID enclosure to expand NAS storage space, the enclosure must have exactly one external RAID group. Individual disks cannot be used to expand NAS space.
- To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.6:
Kernel 3.10.20: TS-128, TS-228
Kernel 3.2.26: TS-x31, TS-x31U
Kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
Kernel 4.2.8: all other models supported by QTS 4.3.6
- Due to the limitations of future kernel updates, QTS 4.3.6 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.6, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.
[Known Issues]
- When a TR-002 external RAID enclosure is connected to a USB 3.1 Gen2 port on the NAS, the bus type incorrectly appears as USB 3.0 in the QTS UI. This is a UI problem only, data will actually be transferred at USB 3.1 Gen2 speeds.
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage ＆ Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
- A failed external RAID group may have the status "Unknown" instead of "Failed".
[Fixed Issues]
- The bcclient process would sometimes cause high memory usage after users updated QTS to 4.3.6.0875 build 20190308.
- Files with certain special characters on file-based iSCSI LUNs would be kept in quarantine unexpectedly after users updated QTS to 4.3.6.0875 build 20190308.
關閉廣告