個人積分：27分
文章編號：67026464
[Important Notes]
- To learn about the latest changes for x86-based models in this QTS build, see the [Fixed Issues] section below.
- To ensure system stability, QNAP recommends updating and then restarting QVPN Service in App Center after you update QTS to 4.3.4.
- As QTS previous versions of ARM models do not support snapshots, when you upgrade to QTS 4.3.4, the original volume cannot use this feature immediately. To solve this problem, you have to back up the existing data on your QNAP NAS to external storage. Then you can rebuild the QNAP NAS and take snapshots to the new storage pool with multiple volumes.
- Users can now downgrade QTS on ARM-based models. To downgrade to the target version, first downgrade to QTS 4.3.3.0351 Build 20171023 (or later versions).
- QTS 4.3.4 is the final available firmware update for the following models:
TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-1269U-RP, TS-869U-RP, TS-469U-RP, TS-469U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, TS-470, TS-869 Pro, TS-869L, TS-669 Pro, TS-669L, TS-569 Pro, TS-569L, TS-469 Pro, TS-469L, TS-269 Pro, TS-269L, IS-400 Pro.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Starting from QTS 4.3.4, QNAP NAS devices no longer support creating storage pools or static volumes using NVMe PCIe/M.2 SSDs. However, this limitation does not apply to the SSDs installed in built-in M.2 slots or on QM2 expansion cards.
- - For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
[New Features]
Compatibility
- Added support for the TP-Link TL-WDN7200H USB Wi-Fi adapter.
External Storage
- You can now connect a smart phone as an external storage device via the MTP or PTP protocol.
File Station
- Added support for viewing 360° videos and photos in File Station Media Viewer.
- Added support for opening text files with Text Editor.
- Added access to snapshot features in File Station.
- Added access to Qtier Auto-Tiering features in File Station.
- Added support for playing videos with VLC media player in File Station.
- Snapshot Manager can be opened from File Station.
- Snapshot Directory enables users to view and restore snapshots in File Station.
- A shared folder can be automatically migrated to a snapshot shared folder.
GPU
- Added support for discrete GPU cards. A GPU card can improve transcoding performance, and enables your NAS to run HD Station and Linux Station (only supported on TS-1685 and TS-x77 series NAS, but not supported on Linux Station 1.4).
myQNAPcloud
- Users can now use their phone number as their QNAP ID when registering the NAS to their myQNAPcloud account.
Qboost
- New application Qboost helps you optimize RAM usage, clear junk files and schedule your applications.
Qtier Auto Tiering
- Added more Qtier reporting options.
- You can specify times that Qtier should not perform auto-tiering in both Qtier scheduling modes.
- Qtier's algorithms have been updated to improve random access performance.
Qtier has a new automatic optimization mode, where advanced settings such as tiering priority, SSD tier reserved space and data allocation priority are hidden.
- A normal storage pool can now be converted to a Qtier storage pool at any time.
RAID 50/60
- RAID 50 and RAID 60 can be used with Qtier and static volumes.
Resource Monitor
- Resource Monitor now shows shared graphics memory usage.
- Resource Monitor now shows dedicated graphics card memory usage.
Snapshot
- Reserved snapshot space has been updated and renamed to "Guaranteed Snapshot Space"
- Added snapshot support for certain ARM-based NAS models (TS-x31P, TS-x31X, TS-x35 series)
- Storage ＆ Snapshots contains new snapshot overview and summary pages.
- When creating a new snapshot time zone information is now included in the snapshot name.
- In Snapshot Manager, files and folders can be restored from a snapshot to a remote location or as a new shared folder.
- File-based LUNs can now be viewed in Snapshot Manager, and can also be restored to their source volume as a new LUN.
Snapshot Replica
- Added new Snapshot Replica backup plans and schedules.
Storage Management
- RAID 50 and RAID 60 are now supported.
- Added instructions on how to fix a RAID group which is in a degraded or error state.
- "Secure Erase" enables you permanently erase all data from a disk, with three modes: complete erase, ATA command erase and fast erase.
- A thick volume can now be converted to a thin volume.
Users can now adjust RAID rebuild, migration, scrub, sync priority and speed.
Video Station
- Added support for the HTTP Live Streaming protocol.
[Enhancements]
App Center
- QTS now displays a warning message and asks for confirmation when installing a 3rd-party application.
- App Center now helps with dependencies between dependent applications.
Control Panel
- QTS now displays information about QM2 expansion cards in "Control Panel" > "System" > "System Status" > "Hardware Information".
File Station
- File Station now displays information about SSD cache and Qtier auto-tiering.
- Updated the @Recently-Snapshot folder icon in SMB shares.
- A snapshot shared folder can now be created using thick provisioning.
- Improved the file compression and extraction speeds in File Station.
HD Station
- Users can now access HybridDesk Station via Remote Desktop without connecting the NAS to an HDMI monitor.
Kernel
- "Updated the kernel version from 3.10.20 to 4.2.8 for the following models:
TS-231+, TS-431+, TS-531P, TS-131P, TS-231P, TS-431P, TS-231P2, TS-431P2, TS-431X, TS-531X, TS-831X, TS-431X2, TS-431XU, TS-431XU-RP, TS-831XU, TS-831XU-RP, TS-1231XU, TS-1231XU-RP, TS-431XeU, TS-1635."
Qtier Auto Tiering
- Users can now disable Qtier auto-tiering on individual shared folders or LUNs.
QTS
- QTS desktop features an enhanced volume control (only for certain NAS models with a built-in speaker)
- A beginner’s guide to QTS is shown to new users when they first log into QTS.
- Increased file-based SWAP size to 16GB on advanced NAS models.
Resource Monitor
- Resource Monitor now shows system services and system processes separately.
Snapshot
- A LUN snapshot can now be reverted while the LUN is mapped to an iSCSI target.
- The automatic deletion of old snapshots can now be disabled.
- Hidden files can be made visible in Snapshot Manager.
- "Storage ＆ Snapshots" replaces "Storage Manager". It includes a redesigned and improved storage management interface.
- Reduced the memory requirement for using snapshots from 4GB to 1GB. The maximum number of snapshots per volume/LUN/NAS is dependent on the amount of installed memory.
- Changed the wording of Snapshot Vault usage to avoid misunderstandings when calculating the allocated space of a storage pool.
SSD Improvement
- The SSD cache flush algorithms have been updated for better caching performance when under high load.
- A disk trim and performance test is now automatically performed when creating a RAID group.
Storage Management
- Improved the storage pool and volume creation wizards.
- Thin volume space can now be automatically reclaimed if storage pool space is low.
- Updated Virtualization Guide content.
- Changed the default bytes per inode options when creating a volume.
- Added a free storage pool space wizard to help create free pool space.
- Detailed RAID scrubbing results including fixed block counts are now recorded in the system event log.
- Added support for creating storage spaces of over 16TB on certain ARM-based NAS (TS-x31P, TS-x31X, TS-x35 series).
- Thin volumes now get status read/delete instead of read-only when their parent storage pool is full. This enables you to delete data and free up storage pool space.
[Fixed Issues]
- Users could not access files in folders whose filenames contained double-byte characters after updating QTS from 4.3.3 to 4.3.4.
- Unexpected errors would appear in the Linux kernel logs after users updated QTS to 4.3.4 and then took snapshots for existing volumes.
- QTS would display incorrect numbers of files or shared folders after users updated QTS to 4.3.4.
- Fixed a cross-site scripting vulnerability in App Center (CVE-2017-13072).
個人積分：27分
文章編號：67433507
[Important Notes]
- To learn about the latest changes for x86-based models in this QTS build, see the [Fixed Issues] section below.
- To ensure system stability, QNAP recommends updating and then restarting QVPN Service in App Center after you update QTS to 4.3.4.
- As QTS previous versions of ARM models do not support snapshots, when you upgrade to QTS 4.3.4, the original volume cannot use this feature immediately. To solve this problem, you have to back up the existing data on your QNAP NAS to external storage. Then you can rebuild the QNAP NAS and take snapshots to the new storage pool with multiple volumes.
- Users can now downgrade QTS on ARM-based models. To downgrade to the target version, first downgrade to QTS 4.3.3.0351 Build 20171023 (or later versions).
- QTS 4.3.4 is the final available firmware update for the following models:
TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-1269U-RP, TS-869U-RP, TS-469U-RP, TS-469U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, TS-470, TS-869 Pro, TS-869L, TS-669 Pro, TS-669L, TS-569 Pro, TS-569L, TS-469 Pro, TS-469L, TS-269 Pro, TS-269L, IS-400 Pro.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Starting from QTS 4.3.4, QNAP NAS devices no longer support creating storage pools or static volumes using NVMe PCIe/M.2 SSDs. However, this limitation does not apply to the SSDs installed in built-in M.2 slots or on QM2 expansion cards.
- Below are the kernel versions for the NAS models supported by QTS 4.3.4.0479:
kernel 2.6：TS-269H
kernel 3.10.20：TS-128、TS-228
kernel 3.2.26：TS-x31、TS-x31U
kernel 3.4.6：TS-x69、TS-x69U、TS-x69L
kernel 4.2.8：HS-251、IS-400、SS-x79U、TS-x79、TS-x79U、SS-x79U、TS-x70、TS-x70U、TVS-x70、TS-x31P、TS-x31P2、TS-x31+、TS-x31X、TS-x31XU、TS-x28A、TS- x35、TS-x51、TS-x51A、TS-x51U、TS-x53、TS-x53A、TBS-x53A、TS-x53B、TS-x53BU、TS-x53S、IS-453S、TS-x53U、TVS-x63、TS-x63、TS-x63U、TS-x73U、TS-x77、TVS-x80、TS-x80、TVS-x80U、TS-x80U、TVS-x82、TVS-x82S、TVS-1582TU、TS-x85、TES-x85U、TDS-16489U、TVS-x71、TVS-x71U、TVS-x73
[New Features]
- Added support for License Center, an integrated user interface that enables users to manage and purchase licenses. To open License Center, go to ""Control Panel"" > ""System"" > ""License Center"".
Note: License Center uses a new authorization mechanism. Licenses that are purchased from QNAP Store only support QTS 4.3.4 xxxx and later versions. Users can choose to keep existing licenses or convert them to the new format.
- Added support for QNAP Store, a website where users can purchase licenses.
Note: Licenses that are purchased from QNAP Store only support QTS 4.3.4 xxxx and later versions.
- Users can now activate a beep alarm or blink LED indicators to quickly locate the NAS. To use this feature, go to "QTS Desktop" > "Toolbar" > "Options" > "Locate my NAS".
- Users can now specify their regions. System services are localized for the selected region. To select a region, go to "Control Panel" > "System" > "General Settings" > "Region".
- Updated the user interface of McAfee Antivirus to provide support for QTS License Center.
Note: To work with License Center, McAfee must be updated to 2.0.0."
- Added support for Web Services Dynamic Discovery (WS-Discovery) so that File Explorer in Windows 10 can display NAS device names.
[Enhancements]
- Removed the "My License" section from App Center. License management features are now integrated into "License Center".
- Added a note to remind users that enabling Remote Desktop may affect the playback quality of local videos.
[Fixed Issues]
- File Station would take a long time to search for keywords through a large number of files.
- Network connection errors would occur when users kept downloading torrent files via the 10 Gigabit Ethernet port.
- QTS would unmount certain volumes when the NAS restarted after users updated QTS to 4.3.4.0435 Build 20171230.
- Users would not be prompted for a security code when they logged on to QTS via SmartURL even if 2-step verification was enabled.
- Users could not select the disks no.9 to no.12 when creating an SSD cache on the TS-1263U.
- After users converted a thick volume to a thin volume, Storage ＆ Snapshots would incorrectly show the usage of the volume as 100% allocated.
- Storage ＆ Snapshots would display an incorrect error message when users clicked "Expand Volume" to expand a legacy volume.
- QTS Dashboard should not display warning messages when the storage space of an external drive was almost full.
- Snapshot Manager could not display the shared folders on the volumes protected by snapshots.
- Users could not set the NAS as an additional domain controller after updating QTS to 4.3.4.
- Users could not view the files in NFS shared folders on encrypted NAS volumes via Windows after restarting the NAS.
- Naming shared folders with certain special characters would cause QTS to display a blank screen in "Control Panel" > "Privilege" > "Shared Folders".
- Setting a virtual switch as the system default gateway would cause network connection errors.
- Storage ＆ Snapshots would display a warning message about insufficient storage space when users modified the capacity of an iSCSI LUN even if the storage pool had enough space.
- The file sort order in a shared folder would be different from the sort order in the shared link of the shared folder.
- On the myQNAPcloud website, the setup page and the FAQ page for 2-step verification did not list the same supported regions.
- Users with read-only permissions could not view the thumbnails of media files in File Station.
- Users could not send an email via PHP using a web browser.
- Users could not be authenticated using certain passwords when creating a remote snapshot replication job.
- Google Chrome would display a warning message about untrusted certificates when users tried to access the NAS via HTTPS with a self-signed certificate created in QTS.
- Enhanced system and data security measures for configuration files.
個人積分：4958分
文章編號：67434948
個人積分：27分
文章編號：67435364
個人積分：27分
文章編號：67448171
[重要事項]
- 若要瞭解 x86 系列機種在此 QTS 版本的變更項目，請參閱下方的［修復問題］部分。
- 為確保系統穩定性，建議您在將 QTS 更新至 4.3.4 後，前往 App Center 更新並且重新啟動 QVPN Service。
- 因為ARM models之前的版本尚未支援快照，故當您升級到QTS 4.3.4之後，之前所建立的磁碟區將無法直接使用快照功能。為解決此一問題，請先將QNAP NAS中的資料備份至外接裝置，重新建立磁碟陣列和儲存池後，再將資料匯入。
- 使用者現可在 ARM 機種降級 QTS 版本。若要降級至目標版本，請先降級至 QTS 4.3.3.0351 Build 20171023（或之後版本）。
- QTS 4.3.4 為下列機種可適用的最後韌體更新：
TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-1269U-RP, TS-869U-RP, TS-469U-RP, TS-469U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, TS-470, TS-869 Pro, TS-869L, TS-669 Pro, TS-669L, TS-569 Pro, TS-569L, TS-469 Pro, TS-469L, TS-269 Pro, TS-269L, IS-400 Pro。
- 支援其他機種的 QTS 作業系統將陸續推出。QTS 更新及服務支援狀況，請參考產品支援狀態列表(https://www.qnap.com/en/product/eol.php)。
- TS 4.3.x 安裝於搭載 64 位元 Intel 或 AMD 處理器的 NAS 機種時，可能不支援部分應用程式。若要檢測 NAS 上安裝的應用程式是否相容於 QTS 4.3.x，請下載 QTS 64 位元相容性檢測工具，並安裝至您目前版本的 QTS。(https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- 從 QTS 4.3.4 起，QNAP NAS 不再支援使用 NVMe PCIe/M.2 SSD 建立儲存池或靜態磁碟區，然而安裝於內建 M.2 插槽或 QM2 擴充卡上的 SSD 則不受此限制。
- QTS 4.3.4.0479 支援機種所搭載的 kernel 版本：
kernel 2.6: TS-269H
kernel 3.10.20: TS-128, TS-228
kernel 3.2.26: TS-x31, TS-x31U
kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
kernel 4.2.8: HS-251, IS-400, SS-x79U, TS-x79, TS-x79U, SS-x79U, TS-x70, TS-x70U, TVS-x70, TS-x31P, TS-x31P2, TS-x31+, TS-x31X, TS-x31XU, TS-x28A, TS- x35, TS-x51, TS-x51A, TS-x51U, TS-x53, TS-x53A, TBS-x53A, TS-x53B, TS-x53BU, TS-x53S, IS-453S, TS-x53U, TVS-x63, TS-x63, TS-x63U, TS-x73U, TS-x77, TVS-x80, TS-x80, TVS-x80U, TS-x80U, TVS-x82, TVS-x82S, TVS-1582TU, TS-x85, TES-x85U, TDS-16489U, TVS-x71, TVS-x71U, TVS-x73
[新增功能]
- 支援新版的「授權中心」。請前往[控制台] > [系統] > [授權中心]，使用者可透過使用者介面，購買與管理產品授權。
注意: 「授權中心」採用新的認證機制。從 QNAP 網路商店購買的授權，僅支援 QTS 4.3.4.xxx 或以上版本。既有的授權，使用者可選擇保留目前格式，或轉換成新授權格式。
- 使用者可透過 QNAP 網路商店購買產品授權。
注意: 從 QNAP 商店購買的授權，僅支援 QTS 4.3.4.xxx 或以上版本。"
- 使用者可透過開啟嗶聲警示音或 LED 閃爍燈，來快速定位 NAS。欲使用此功能，請至[QTS 桌面] > [工具] > [選項] > [定位我的 NAS]。
- 支援由使用者指定地區，系統將已依照選取的地區提供在地化語系服務。欲選取地區，請至[控制台] > [系統] > [一般設定] > [地區]。
- 更新 McAfee Antivirus 使用者介面以支援 QTS 授權中心。
注意: McAfee 必須更新至 2.0.0 版本，才能在授權中心上正常運作。"
- 支援 Web Services Dynamic Discovery (WS-Discovery)，讓 NAS 裝置名稱可正常顯示在 Windows 10 的檔案總管內。
[改善項目]
- 從 App Center 中移除「我的授權」。管理授權的相關功能，已經整合至「授權中心」。
- 新增注意事項，提醒使用者當開啟遠端桌面時，可能會影響本機的影片播放品質。
[修復問題]
- File Station 在大量檔案中搜尋關鍵字時會需時過久。
- 若使用者透過 10 Gigabit 網路埠持續下載 BT 檔案，NAS 會發生網路連線錯誤。
- 使用者將 QTS 更新至 4.3.4.0435 Build 20171230 後，QTS 會在 NAS 重新啟動時卸載特定磁碟區。
- 使用者透過 SmartURL 登入 QTS 時，即使已啟用兩步驟驗證，也不需輸入安全碼。
- 使用者在 TS-1263U 上建立 SSD 快取時，無法選取第 9 到第 12 號磁碟。
- 使用者將完整磁碟區轉換為精簡磁碟區後，儲存與快照總管會誤將此磁碟區使用量顯示為 100% 已配置。
- 使用者在儲存與快照總管點擊［擴充磁碟區］以擴充 legacy 磁碟區時，系統會顯示不正確的錯誤訊息。
- QTS 儀表板不應在外接硬碟儲存空間將滿時顯示警告訊息。
- 快照管理員無法顯示受快照保護的磁碟區上的共用資料夾。
- 使用者在將 QTS 更新至 4.3.4 後，無法將 NAS 設為額外網域控制站。
- 使用者重新啟動 NAS 後，無法透過 Windows 檢視加密磁碟區上的 NFS 共用資料夾中的檔案。
- 若以特定的特殊字元為共用資料夾命名，可能導致 QTS 在［控制台］>［權限］>［共用資料夾］顯示空白頁面。
- 將虛擬交換器設為系統預設閘道會導致網路連線錯誤。
- 使用者修改 iSCSI LUN 容量時，即使儲存池的空間足夠，儲存與快照總管也會顯示空間不足的警告訊息。
- 共用資料夾中的檔案排序會與該資料夾的分享連結中的檔案排序不一致。
- 在 myQNAPcloud 網站上，設定頁面與 FAQ 頁面列出的兩步驟驗證的支援區域不一致。
- 僅具有讀取權限的使用者無法在 File Station 檢視多媒體檔案的縮圖。
- 使用者無法使用瀏覽器透過 PHP 寄送電子郵件。
- 使用者建立遠端快照備份任務時，無法使用特定密碼通過驗證。
- 使用者嘗試透過在 QTS 建立的自簽憑證以 HTTPS 連線存取 NAS 時，Google Chrome 會顯示未受信任憑證的警告訊息。
- 加強系統設定檔的資料保護措施。
個人積分：27分
文章編號：67560029
[重要事項]
- 若要瞭解 x86 系列機種在此 QTS 版本的變更項目，請參閱下方的［修復問題］部分。
- 為確保系統穩定性，建議您在將 QTS 更新至 4.3.4 後，前往 App Center 更新並且重新啟動 QVPN Service。
- 因為ARM models之前的版本尚未支援快照，故當您升級到QTS 4.3.4之後，之前所建立的磁碟區將無法直接使用快照功能。為解決此一問題，請先將QNAP NAS中的資料備份至外接裝置，重新建立磁碟陣列和儲存池後，再將資料匯入。
- 使用者現可在 ARM 機種降級 QTS 版本。若要降級至目標版本，請先降級至 QTS 4.3.3.0351 Build 20171023（或之後版本）。
- QTS 4.3.4 為下列機種可適用的最後韌體更新：
TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-1269U-RP, TS-869U-RP, TS-469U-RP, TS-469U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, TS-470, TS-869 Pro, TS-869L, TS-669 Pro, TS-669L, TS-569 Pro, TS-569L, TS-469 Pro, TS-469L, TS-269 Pro, TS-269L, IS-400 Pro。
- 支援其他機種的 QTS 作業系統將陸續推出。QTS 更新及服務支援狀況，請參考產品支援狀態列表(https://www.qnap.com/en/product/eol.php)。
- TS 4.3.x 安裝於搭載 64 位元 Intel 或 AMD 處理器的 NAS 機種時，可能不支援部分應用程式。若要檢測 NAS 上安裝的應用程式是否相容於 QTS 4.3.x，請下載 QTS 64 位元相容性檢測工具，並安裝至您目前版本的 QTS。(https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- 從 QTS 4.3.4 起，QNAP NAS 不再支援使用 NVMe PCIe/M.2 SSD 建立儲存池或靜態磁碟區，然而安裝於內建 M.2 插槽或 QM2 擴充卡上的 SSD 則不受此限制。
- QTS 4.3.4.0479 支援機種所搭載的 kernel 版本：
kernel 2.6: TS-269H
kernel 3.10.20: TS-128, TS-228
kernel 3.2.26: TS-x31, TS-x31U
kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
kernel 4.2.8: HS-251, IS-400, SS-x79U, TS-x79, TS-x79U, SS-x79U, TS-x70, TS-x70U, TVS-x70, TS-x31P, TS-x31P2, TS-x31+, TS-x31X, TS-x31XU, TS-x28A, TS- x35, TS-x51, TS-x51A, TS-x51U, TS-x53, TS-x53A, TBS-x53A, TS-x53B, TS-x53BU, TS-x53S, IS-453S, TS-x53U, TVS-x63, TS-x63, TS-x63U, TS-x73U, TS-x77, TVS-x80, TS-x80, TVS-x80U, TS-x80U, TVS-x82, TVS-x82S, TVS-1582TU, TS-x85, TES-x85U, TDS-16489U, TVS-x71, TVS-x71U, TVS-x73
[修復問題]
- QTS 無法偵測到 QXG-10G1T 10 GbE PCIe 網路卡。
- 使用者將 QTS 更新至 4.3.4.0483 build 20180213 後，開機啟動程序會耗時較久。
個人積分：27分
文章編號：67771202
[Important Notes]
- To learn about the latest changes for x86-based models in this QTS build, see the [Fixed Issues] section below.
- To ensure system stability, QNAP recommends updating and then restarting QVPN Service in App Center after you update QTS to 4.3.4.
- As QTS previous versions of ARM models do not support snapshots, when you upgrade to QTS 4.3.4, the original volume cannot use this feature immediately. To solve this problem, you have to back up the existing data on your QNAP NAS to external storage. Then you can rebuild the QNAP NAS and take snapshots to the new storage pool with multiple volumes.
- Users can now downgrade QTS on ARM-based models. To downgrade to the target version, first downgrade to QTS 4.3.3.0351 Build 20171023 (or later versions).
- QTS 4.3.4 is the final available firmware update for the following models:
TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-1269U-RP, TS-869U-RP, TS-469U-RP, TS-469U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, TS-470, TS-869 Pro, TS-869L, TS-669 Pro, TS-669L, TS-569 Pro, TS-569L, TS-469 Pro, TS-469L, TS-269 Pro, TS-269L, IS-400 Pro.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Starting from QTS 4.3.4, QNAP NAS devices no longer support creating storage pools or static volumes using NVMe PCIe/M.2 SSDs. However, this limitation does not apply to the SSDs installed in built-in M.2 slots or on QM2 expansion cards.
- Below are the kernel versions for the NAS models supported by QTS 4.3.4.0479:
kernel 3.10.20: TS-128, TS-228
kernel 3.2.26: TS-x31, TS-x31U
kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
kernel 4.2.8: HS-251, IS-400, SS-x79U, TS-x79, TS-x79U, SS-x79U, TS-x70, TS-x70U, TVS-x70, TS-x31P, TS-x31P2, TS-x31+, TS-x31X, TS-x31XU, TS-x28A, TS- x35, TS-x51, TS-x51A, TS-x51U, TS-x53, TS-x53A, TBS-x53A, TS-x53B, TS-x53BU, TS-x53S, IS-453S, TS-x53U, TVS-x63, TS-x63, TS-x63U, TS-x73U, TS-x77, TVS-x80, TS-x80, TVS-x80U, TS-x80U, TVS-x82, TVS-x82S, TVS-1582TU, TS-x85, TES-x85U, TDS-16489U, TVS-x71, TVS-x71U, TVS-x73
[New Features]
- Added support for using discrete GPU on the TVS-x73e (for Container Station only) and the TVS-x82 (for Container Station or Virtualization Station).
[Fixed Issues]
- Updated PHP to the latest version to fix multiple vulnerabilities.
- Enabling Disk Standby Mode would hinder the NAS from reporting disk information via the SNMP service.
- Control Panel could not display the list of domain users.
- The modified dates of files on FAT32 external drives would change after users reconnected the external drives.
- Users could not access Storage & Snapshots via Safari on macOS after updating QTS to 4.3.4.0435 build 20171230.
- Unexpected errors would occur to the system partition after users removed another disk after a RAID rebuild.
- Users could not take snapshots if the usernames of the members in the "administrators" group contained a space.
- The French strings in Storage & Snapshots contained some spelling errors.
- Unexpected error messages would appear when users tried to access shared folders in Qsync Central 3.0.3 after updating QTS to 4.3.4.0483 build 20180213.
- System logs would warn of insufficient space after users enabled Guaranteed Snapshot Space, created thick volumes, and then took snapshots.
- Enabling advanced folder permissions would prevent non-administrators from accessing external storage devices via SMB after users updated QTS to 4.3.4.0483 build 20180213.
- Administrators could not perform backup tasks in Virtualization Station 3.1.7.
- Non-administrators could not access portal folders (for folder aggregation) via Samba after enabling advanced folder permissions.
- After users dragged folders from File Station to the QTS desktop, the created desktop shortcuts would be named "File Station".
個人積分：27分
文章編號：67981156
[Important Notes]
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- To ensure system stability, QNAP recommends updating and then restarting QVPN Service in App Center after you update QTS to 4.3.4.
- As QTS previous versions of ARM models do not support snapshots, when you upgrade to QTS 4.3.4, the original volume cannot use this feature immediately. To solve this problem, you have to back up the existing data on your QNAP NAS to external storage. Then you can rebuild the QNAP NAS and take snapshots to the new storage pool with multiple volumes.
- QTS 4.3.4 is the final available firmware update for the following models:
TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-1269U-RP, TS-869U-RP, TS-469U-RP, TS-469U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, TS-470, TS-869 Pro, TS-869L, TS-669 Pro, TS-669L, TS-569 Pro, TS-569L, TS-469 Pro, TS-469L, TS-269 Pro, TS-269L, IS-400 Pro.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Starting from QTS 4.3.4, QNAP NAS devices no longer support creating storage pools or static volumes using NVMe PCIe/M.2 SSDs. However, this limitation does not apply to the SSDs installed in built-in M.2 slots or on QM2 expansion cards.
- Below are the kernel versions for the NAS models supported by QTS 4.3.4.0479:
kernel 3.10.20: TS-128, TS-228
kernel 3.2.26: TS-x31, TS-x31U
kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
kernel 4.2.8: HS-251, IS-400, SS-x79U, TS-x79, TS-x79U, SS-x79U, TS-x70, TS-x70U, TVS-x70, TS-x31P, TS-x31P2, TS-x31+, TS-x31X, TS-x31XU, TS-x28A, TS- x35, TS-x51, TS-x51A, TS-x51U, TS-x53, TS-x53A, TBS-x53A, TS-x53B, TS-x53BU, TS-x53S, IS-453S, TS-x53U, TVS-x63, TS-x63, TS-x63U, TS-x73U, TS-x77, TVS-x80, TS-x80, TVS-x80U, TS-x80U, TVS-x82, TVS-x82S, TVS-1582TU, TS-x85, TES-x85U, TDS-16489U, TVS-x71, TVS-x71U, TVS-x73
[Fixed Issues]
- Updated ClamAV to the latest version to fix multiple vulnerabilities.
- Unexpected errors in the RAID configuration files would hinder users from creating new storage pools after existing storage pools failed.
- Media Library could not set multiple shared folders as media folders if they shared the same path.
- The confirmation message string for file system check would repeat several times in certain languages.
- Enabling Service Binding would cause the SNMP service to stop functioning after users updated QTS to 4.3.4.0486 build 20180215.
- Fixed a vulnerability in Samba that could allow authenticated users to arbitrarily change the passwords of other users (CVE-2018-1057).
- Fixed a vulnerability in Samba that could allow for denial-of-service attacks on the Print Spooler service (CVE-2018-1050).
- File Station could not display the files in a subfolder after users moved this folder into another subfolder.
- An error message would appear when users cut and paste a file from a folder to its subfolder in File Station.
個人積分：1189分
文章編號：68029488
個人積分：27分
文章編號：68200377
[重要事項]
- 對於搭載 Annapurna Labs 處理器的 ARM 機種，此次 QTS 更新會將系統儲存區的檔案系統升級為 ext4。為了確保您的資料安全，在此次更新後，您將無法將 QTS 降級至先前版本。
影響機種：TS-131P、TS-231P、TS-431P、TS-531P、TS-231+、TS-431+、TS-231P2、TS-431P2、TS-431X、TS-431X2、TS-531X、TS-831X、TS-1231XU-RP、TS-1231XU、TS-831XU-RP、TS-831XU、TS-431XU-RP、TS-431XU、TS-431XeU、TS-1635。
- 為確保系統穩定性，建議您在將 QTS 更新至 4.3.4 後，前往 App Center 更新並且重新啟動 QVPN Service。
- 因為ARM models之前的版本尚未支援快照，故當您升級到QTS 4.3.4之後，之前所建立的磁碟區將無法直接使用快照功能。為解決此一問題，請先將QNAP NAS中的資料備份至外接裝置，重新建立磁碟陣列和儲存池後，再將資料匯入。
- QTS 4.3.4 為下列機種可適用的最後韌體更新：
TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-1269U-RP, TS-869U-RP, TS-469U-RP, TS-469U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, TS-470, TS-869 Pro, TS-869L, TS-669 Pro, TS-669L, TS-569 Pro, TS-569L, TS-469 Pro, TS-469L, TS-269 Pro, TS-269L, IS-400 Pro。
- 支援其他機種的 QTS 作業系統將陸續推出。QTS 更新及服務支援狀況，請參考產品支援狀態列表(https://www.qnap.com/en/product/eol.php)。
- TS 4.3.x 安裝於搭載 64 位元 Intel 或 AMD 處理器的 NAS 機種時，可能不支援部分應用程式。若要檢測 NAS 上安裝的應用程式是否相容於 QTS 4.3.x，請下載 QTS 64 位元相容性檢測工具，並安裝至您目前版本的 QTS。(https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- 從 QTS 4.3.4 起，QNAP NAS 不再支援使用 NVMe PCIe/M.2 SSD 建立儲存池或靜態磁碟區，然而安裝於內建 M.2 插槽或 QM2 擴充卡上的 SSD 則不受此限制。
- QTS 4.3.4.0479 支援機種所搭載的 kernel 版本：
kernel 3.10.20: TS-128, TS-228
kernel 3.2.26: TS-x31, TS-x31U
kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
kernel 4.2.8: HS-251, IS-400, SS-x79U, TS-x79, TS-x79U, SS-x79U, TS-x70, TS-x70U, TVS-x70, TS-x31P, TS-x31P2, TS-x31+, TS-x31X, TS-x31XU, TS-x28A, TS- x35, TS-x51, TS-x51A, TS-x51U, TS-x53, TS-x53A, TBS-x53A, TS-x53B, TS-x53BU, TS-x53S, IS-453S, TS-x53U, TVS-x63, TS-x63, TS-x63U, TS-x73U, TS-x77, TVS-x80, TS-x80, TVS-x80U, TS-x80U, TVS-x82, TVS-x82S, TVS-1582TU, TS-x85, TES-x85U, TDS-16489U, TVS-x71, TVS-x71U, TVS-x73
[修復問題]
- 若使用者選擇不儲存密鑰，重新啟動 NAS 後，解鎖加密的磁碟區會耗時過久，且使用者無法存取部分應用程式。
- 修復一個跨網站指令碼安全漏洞，以防範未經授權的使用者取得機敏資訊。
- 更新 ClamAV 至最新版本以修復數個安全漏洞。
- 儲存池發生故障後，RAID 組態檔中的未知錯誤會阻礙使用者建立新的儲存池。
- 媒體櫃無法將數個路徑相同的共用資料夾設為媒體資料夾。
- 檔案系統檢查的確認訊息字串在特定語言會重複數次。
- 使用者將 QTS 更新至 4.3.4.0486 build 20180215 後，啟用服務連結會導致 SNMP 服務停止運作。
- 修復 Samba 中的潛在安全漏洞，以防範任何通過驗證的使用者任意修改其他使用者的密碼 (CVE-2018-1057)。
- 修復 Samba 中的潛在安全漏洞，以防範對於 Print Spooler 服務的阻斷服務攻擊 (CVE-2018-1050)。
- 使用者將一個子資料夾移入另一個子資料夾後，File Station 無法顯示該資料夾中的檔案。
- 使用者在 File Station 將檔案從一資料夾剪貼至其子資料夾時，系統會顯示錯誤訊息。
- 使用者將 NAS 加入 Active Directory 網域並且啟用進階資料夾權限與 Windows ACL 後，透過 Samba 存取共用資料夾時會無法還原快照資料。
關閉廣告