TS-119II 4.3.3.0998
最近登入管理介面都進不去
一直在繞圈圈
不知道是不是跟更新了新版本有關係



另外最近買了顆SSD 一顆灌WIN10 一顆灌WIN7
因為還在熟悉WIN10中 雙系統切換著用
不知道為何有時兩個系統都會被NAS鎖IP
是不是兩個系統都拿到同一個IP所致
QTS 4.3.6.1070 build 20190919

[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.

Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.

- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.6:
Kernel 3.10.20: TS-128, TS-228
Kernel 3.2.26: TS-x31, TS-x31U
Kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
Kernel 4.2.8: all other models supported by QTS 4.3.6
- Due to the limitations of future kernel updates, QTS 4.3.6 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.6, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.

[New features]
QTS Security
- To enhance system security, "IP Access Protection" is enabled by default for the SSH, Telnet, and HTTP(S) protocols.

[Fixed Issues]
- Users could not access mounted shared folders on Windows or on macOS after updating QTS to 4.3.6.1050.
- Users could not open or paste files inside the Home folder in Windows via SMB.
- Users could not mount remote Windows FTP folders in File Station.
- Users could not access mounted shared folders via NFS.
- Users could not run executable files after transferring these files from Mac to the NAS via AFP.
- QTS could not detect disks installed on the TR-004 expansion enclosure after users replaced disks.
- Storage pools created on the TR-004 expansion enclosure would be in abnormal status after users updated QTS to 4.3.6.0979 build 20190620.
- Users could not wake the NAS using Qfinder Pro via Wake-on-LAN after updating QTS to 4.3.6.0923 build 20190425.
- Network & Virtual Switch could not correctly display the information of Aquantia AQtion AQN-107 network adapter after users enabled VLAN.
- QTS would not remember guest access permission settings after users updated QTS from earlier versions.
- LDAP user groups would stop accepting LDAP users before the number of users reached the expected limit.
- Administrators' access to WebDAV shared folders would be affected by the access permission settings of guest users.
- Final Cut Pro could not open videos imported from NAS shared folders mounted via NFS.
- The volume serial numbers of network drives would change after users changed the NAS server name.
- Only the user who upload a file could access this file if other QTS users had usernames containing two whitespace characters.
- Storage pools created on the TR-004 expansion enclosure would be in abnormal status after the NAS woke up from sleep mode.
- The speeds of system fans on the UX-500P RAID expansion enclosure would increase abnormally after connecting to the NAS and staying idle for a while.

[Known Issues]
- When a TR-002 external RAID enclosure is connected to a USB 3.1 Gen2 port on the NAS, the bus type incorrectly appears as USB 3.0 in the QTS UI. This is a UI problem only, data will actually be transferred at USB 3.1 Gen2 speeds.
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage & Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
- A failed external RAID group may have the status "Unknown" instead of "Failed".
QTS 4.3.6.1154 build 20191212

[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.6:
Kernel 3.10.20: TS-128, TS-228
Kernel 3.2.26: TS-x31, TS-x31U
Kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
Kernel 4.2.8: all other models supported by QTS 4.3.6
- Due to the limitations of future kernel updates, QTS 4.3.6 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.6, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.

[Fixed Issues]
- Fixed a vulnerability in File Station concerning improper link resolution (CVE-2019-7183).
- A slight delay would occur between the snapshot scheduled time and the actual snapshot taken time.

[Known Issues]
- When a TR-002 external RAID enclosure is connected to a USB 3.1 Gen2 port on the NAS, the bus type incorrectly appears as USB 3.0 in the QTS UI. This is a UI problem only, data will actually be transferred at USB 3.1 Gen2 speeds.
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage & Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
- A failed external RAID group may have the status "Unknown" instead of "Failed".
QTS 4.3.6.1218
build 20200214

[重要事項]
- 為確保系統順利運作,更新 QTS 版本至 4.3.6 後,請在 App Center 一併更新 Container Station 版本至 1.9,再重新啟用 QVR Pro。
- 原 RADVD 功能不提供對外連線設定,請於更新後重新設定 RADVD 功能。
- 基於安全考量,不再支援 Wi-Fi ad-hoc 模式。
- 對於搭載 Annapurna Labs 處理器的 ARM 機種,此次 QTS 更新會將系統儲存區的檔案系統升級為 ext4。為了確保您的資料安全,在此次更新後,您將無法將 QTS 降級至先前版本。
影響機種:TS-131P、TS-231P、TS-431P、TS-531P、TS-231+、TS-431+、TS-231P2、TS-431P2、TS-431X、TS-431X2、TS-531X、TS-831X、TS-1231XU-RP、TS-1231XU、TS-831XU-RP、TS-831XU、TS-431XU-RP、TS-431XU、TS-431XeU、TS-1635。
- 支援其他機種的 QTS 作業系統將陸續推出。QTS 更新及服務支援狀況,請參考產品支援狀態列表(https://www.qnap.com/en/product/eol.php)。
- QTS 4.3.x 安裝於搭載 64 位元 Intel 或 AMD 處理器的 NAS 機種時,可能不支援部分應用程式。若要檢測 NAS 上安裝的應用程式是否相容於 QTS 4.3.x,請下載 QTS 64 位元相容性檢測工具,並安裝至您目前版本的 QTS。(https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- QTS 4.3.6 支援機種所搭載的 kernel 版本如下:
Kernel 3.10.20:TS-128、TS-228
Kernel 3.2.26:TS-x31、TS-x31U
Kernel 3.4.6:TS-x69、TS-x69U、TS-x69L
Kernel 4.2.8:所有其餘支援 QTS 4.3.6 的機種
- 由於往後系統核心更新的限制,QTS 4.3.6 為下列 NAS 機種最後可用的 QTS 版本更新: TS-EC1679U-SAS-RP、TS-EC1679U-RP、TS-1679U-RP、TS-EC1279U-SAS-RP、TS-EC1279U-RP、TS-1279U-RP、TS-1079 Pro、TS-EC879U-RP、TS-879U-RP、TS-1270U-RP、TS-870U-RP、TS-470U-RP、TS-470U-SP、TS-879 Pro、TVS-870、TS-870 Pro、TS-870、TVS-670、TS-670 Pro、TS-670、TVS-470、TS-470 Pro、TS-470。
- 由於記憶體容量(無法擴充)與 32 位元處理器架構的限制,從 QTS 4.3.6 開始,TS-128 與 TS-228 機種不再支援 Container Station 以及所有相依的應用程式,包含 Notes Station 3、Qcontactz、QcalAgent、AWS Greengrass、QIoT Suite Lite。

[修復問題]
- 修正命令注入漏洞 (CVE-2018-19949)。
- 修正使用者說明中的儲存型跨網站指令碼漏洞 (CVE-2018-19953)。
- 修正 File Station 中的儲存型跨網站指令碼漏洞 (CVE-2018-19943)。
- 修復 PHP 中的多個漏洞:任意命令注入漏洞 (CVE-2018-19518)、阻斷服務漏洞 (CVE-2018-19935)、堆積緩衝區過度讀取漏洞 (CVE-2018-20783)。
- 修正已不受支援的 PHP 版本可能會遭到利用的漏洞。

[已知問題]
- TR-002 外接 RAID 裝置連接到 NAS 上的 USB 3.1 Gen2 埠時,匯流排類型在 QTS UI 中會錯誤地顯示為 USB 3.0。這只是 UI 的問題,資料實際上會以 USB 3.1 Gen2 速度傳輸。
- 接收來自 QNAP 外接 RAID 裝置的資料,或對其傳送資料時,RAID 群組降級後的狀態變更,可能不會立即顯示在「儲存與快照總管」中。
- 若外接 RAID 群組在降級模式下,讀/寫效能將大幅降低。
- 故障的外接 RAID 群組狀態可能會顯示為「未知」而非「故障」。
QTS 4.3.6.1286 build 20200422

[重要事項]
- 為確保系統順利運作,更新 QTS 版本至 4.3.6 後,請在 App Center 一併更新 Container Station 版本至 1.9,再重新啟用 QVR Pro。
- 原 RADVD 功能不提供對外連線設定,請於更新後重新設定 RADVD 功能。
- 基於安全考量,不再支援 Wi-Fi ad-hoc 模式。
- 對於搭載 Annapurna Labs 處理器的 ARM 機種,此次 QTS 更新會將系統儲存區的檔案系統升級為 ext4。為了確保您的資料安全,在此次更新後,您將無法將 QTS 降級至先前版本。影響機種:TS-131P、TS-231P、TS-431P、TS-531P、TS-231+、TS-431+、TS-231P2、TS-431P2、TS-431X、TS-431X2、TS-531X、TS-831X、TS-1231XU-RP、TS-1231XU、TS-831XU-RP、TS-831XU、TS-431XU-RP、TS-431XU、TS-431XeU、TS-1635。
- 支援其他機種的 QTS 作業系統將陸續推出。QTS 更新及服務支援狀況,請參考產品支援狀態列表(https://www.qnap.com/en/product/eol.php)。
- QTS 4.3.x 安裝於搭載 64 位元 Intel 或 AMD 處理器的 NAS 機種時,可能不支援部分應用程式。若要檢測 NAS 上安裝的應用程式是否相容於 QTS 4.3.x,請下載 QTS 64 位元相容性檢測工具,並安裝至您目前版本的 QTS。(https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- QTS 4.3.6 支援機種所搭載的 kernel 版本如下:(1) Kernel 3.10.20:TS-128、TS-228 (2) Kernel 3.2.26:TS-x31、TS-x31U (3) Kernel 4.2.8:所有其餘支援 QTS 4.3.6 的機種。
- 由於往後系統核心更新的限制,QTS 4.3.6 為下列 NAS 機種最後可用的 QTS 版本更新: TS-EC1679U-SAS-RP、TS-EC1679U-RP、TS-1679U-RP、TS-EC1279U-SAS-RP、TS-EC1279U-RP、TS-1279U-RP、TS-1079 Pro、TS-EC879U-RP、TS-879U-RP、TS-1270U-RP、TS-870U-RP、TS-470U-RP、TS-470U-SP、TS-879 Pro、TVS-870、TS-870 Pro、TS-870、TVS-670、TS-670 Pro、TS-670、TVS-470、TS-470 Pro、TS-470。
- 由於記憶體容量(無法擴充)與 32 位元處理器架構的限制,從 QTS 4.3.6 開始,TS-128 與 TS-228 機種不再支援 Container Station 以及所有相依的應用程式,包含 Notes Station 3、Qcontactz、QcalAgent、AWS Greengrass、QIoT Suite Lite。

[修復問題]
- 修正 File Station 中的儲存型跨網站指令碼漏洞 (CVE-2018-19943)。

[已知問題]
- TR-002 外接 RAID 裝置連接到 NAS 上的 USB 3.1 Gen2 埠時,匯流排類型在 QTS UI 中會錯誤地顯示為 USB 3.0。這只是 UI 的問題,資料實際上會以 USB 3.1 Gen2 速度傳輸。
- 接收來自 QNAP 外接 RAID 裝置的資料,或對其傳送資料時,RAID 群組降級後的狀態變更,可能不會立即顯示在「儲存與快照總管」中。
- 若外接 RAID 群組在降級模式下,讀/寫效能將大幅降低。
- 故障的外接 RAID 群組狀態可能會顯示為「未知」而非「故障」。
Qnap只是間小公司,不會有大企業那樣有實險室去模擬系統運行是否正常,等客戶出事然後修改,隨便又出一個系統更新,因為它們保固範圍條款第一部分清楚列明,無論在任何情況下,QNAP都不擔保任何儲存在產品上的資料毀損或資料毀損而引起的損失,所以這種依靠客戶冒險試故障的手法建議隔代才升級,起碼有白老鼠試過新修改沒問題才好用。
我是過路人,親身經歷:https://m.mobile01.com/topicdetail.php?f=494&t=6075113,祝大家好運!
QTS 4.3.6.1333 build 20200608

[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update. Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.6: (1) Kernel 3.10.20: TS-128, TS-228 (2) Kernel 3.2.26: TS-x31, TS-x31U (3) Kernel 4.2.8: all other models supported by QTS 4.3.6
- Due to the limitations of future kernel updates, QTS 4.3.6 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.6, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.

[Fixed Issues]
- Fixed a cross-site scripting vulnerability in File Station (CVE-2020-2495).
- Fixed a cross-site scripting vulnerability in File Station (CVE-2020-2496).
- Fixed a cross-site scripting vulnerability in System Connection Logs (CVE-2020-2497).
- Fixed an LDAP denial of service vulnerability in Samba Active Directory Domain Controller (CVE-2020-10704).

[Known Issues]
- When a TR-002 external RAID enclosure is connected to a USB 3.1 Gen2 port on the NAS, the bus type incorrectly appears as USB 3.0 in the QTS UI. This is a UI problem only, data will actually be transferred at USB 3.1 Gen2 speeds.
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage & Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
- A failed external RAID group may have the status "Unknown" instead of "Failed".
QTS 4.3.6.1411 build 20200825

[重要事項]
- 為確保系統順利運作,更新 QTS 版本至 4.3.6 後,請在 App Center 一併更新 Container Station 版本至 1.9,再重新啟用 QVR Pro。

- 原 RADVD 功能不提供對外連線設定,請於更新後重新設定 RADVD 功能。
- 基於安全考量,不再支援 Wi-Fi ad-hoc 模式。
- 對於搭載 Annapurna Labs 處理器的 ARM 機種,此次 QTS 更新會將系統儲存區的檔案系統升級為 ext4。為了確保您的資料安全,在此次更新後,您將無法將 QTS 降級至先前版本。影響機種:TS-131P、TS-231P、TS-431P、TS-531P、TS-231+、TS-431+、TS-231P2、TS-431P2、TS-431X、TS-431X2、TS-531X、TS-831X、TS-1231XU-RP、TS-1231XU、TS-831XU-RP、TS-831XU、TS-431XU-RP、TS-431XU、TS-431XeU、TS-1635。
- 支援其他機種的 QTS 作業系統將陸續推出。QTS 更新及服務支援狀況,請參考產品支援狀態列表(https://www.qnap.com/en/product/eol.php)。
- QTS 4.3.x 安裝於搭載 64 位元 Intel 或 AMD 處理器的 NAS 機種時,可能不支援部分應用程式。若要檢測 NAS 上安裝的應用程式是否相容於 QTS 4.3.x,請下載 QTS 64 位元相容性檢測工具,並安裝至您目前版本的 QTS。(https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- QTS 4.3.6 支援機種所搭載的 kernel 版本如下:(1) Kernel 3.10.20:TS-128、TS-228 (2) Kernel 3.2.26:TS-x31、TS-x31U (3) Kernel 4.2.8:所有其餘支援 QTS 4.3.6 的機種。
- 由於往後系統核心更新的限制,QTS 4.3.6 為下列 NAS 機種最後可用的 QTS 版本更新: TS-EC1679U-SAS-RP、TS-EC1679U-RP、TS-1679U-RP、TS-EC1279U-SAS-RP、TS-EC1279U-RP、TS-1279U-RP、TS-1079 Pro、TS-EC879U-RP、TS-879U-RP、TS-1270U-RP、TS-870U-RP、TS-470U-RP、TS-470U-SP、TS-879 Pro、TVS-870、TS-870 Pro、TS-870、TVS-670、TS-670 Pro、TS-670、TVS-470、TS-470 Pro、TS-470。
- 由於記憶體容量(無法擴充)與 32 位元處理器架構的限制,從 QTS 4.3.6 開始,TS-128 與 TS-228 機種不再支援 Container Station 以及所有相依的應用程式,包含 Notes Station 3、Qcontactz、QcalAgent、AWS Greengrass、QIoT Suite Lite。

[修復問題]
- 修正 ProFTPD 中的略過本機安全性功能 (Local Security Bypass) 漏洞 (CVE-2017-7418)。
- 修正 ProFTPD 中的空指標取值漏洞 (CVE-2019-19269)。
- 修正 ProFTPD 中的不當憑證驗證 (Improper Certificate Validation) 漏洞 (CVE-2019-19270)。
- 修正 ProFTPD 中的阻斷服務漏洞 (CVE-2019-18217)。
- 修正 ProFTPD 中的空指標取值漏洞 (CVE-2019-19272)。
- 修正 ProFTPD 中的不當憑證驗證 (Improper Certificate Validation) 漏洞 (CVE-2019-19271)。
- 修正 ProFTPD 中的釋放後可重用 (Use-after-free) 漏洞,該漏洞可能會遭有心人士用來執行任意程式碼 (CVE-2020-9273)。
- 修正 ProFTPD 中的越界讀取 (Out-of-bounds Read) 漏洞 (CVE-2020-9272)。
- 修正 Samba Active Directory 網域控制站 (AD DC) 中的 UDP 洪水阻斷服務漏洞。
- 修正 Samba Active Directory 網域控制站中的資源耗盡漏洞 (CVE-2020-10745)。

[已知問題]
- TR-002 外接 RAID 裝置連接到 NAS 上的 USB 3.1 Gen2 埠時,匯流排類型在 QTS UI 中會錯誤地顯示為 USB 3.0。這只是 UI 的問題,資料實際上會以 USB 3.1 Gen2 速度傳輸。
- 接收來自 QNAP 外接 RAID 裝置的資料,或對其傳送資料時,RAID 群組降級後的狀態變更,可能不會立即顯示在「儲存與快照總管」中。
- 若外接 RAID 群組在降級模式下,讀/寫效能將大幅降低。
- 故障的外接 RAID 群組狀態可能會顯示為「未知」而非「故障」。
QTS 4.3.6.1446 build 20200929

[重要事項]
- 為確保系統順利運作,更新 QTS 版本至 4.3.6 後,請在 App Center 一併更新 Container Station 版本至 1.9,再重新啟用 QVR Pro。
- 原 RADVD 功能不提供對外連線設定,請於更新後重新設定 RADVD 功能。
- 基於安全考量,不再支援 Wi-Fi ad-hoc 模式。

- 對於搭載 Annapurna Labs 處理器的 ARM 機種,此次 QTS 更新會將系統儲存區的檔案系統升級為 ext4。為了確保您的資料安全,在此次更新後,您將無法將 QTS 降級至先前版本。影響機種:TS-131P、TS-231P、TS-431P、TS-531P、TS-231+、TS-431+、TS-231P2、TS-431P2、TS-431X、TS-431X2、TS-531X、TS-831X、TS-1231XU-RP、TS-1231XU、TS-831XU-RP、TS-831XU、TS-431XU-RP、TS-431XU、TS-431XeU、TS-1635。
- 支援其他機種的 QTS 作業系統將陸續推出。QTS 更新及服務支援狀況,請參考產品支援狀態列表(https://www.qnap.com/en/product/eol.php)。
- QTS 4.3.x 安裝於搭載 64 位元 Intel 或 AMD 處理器的 NAS 機種時,可能不支援部分應用程式。若要檢測 NAS 上安裝的應用程式是否相容於 QTS 4.3.x,請下載 QTS 64 位元相容性檢測工具,並安裝至您目前版本的 QTS。(https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- QTS 4.3.6 支援機種所搭載的 kernel 版本如下:(1) Kernel 3.10.20:TS-128、TS-228 (2) Kernel 3.2.26:TS-x31、TS-x31U (3) Kernel 4.2.8:所有其餘支援 QTS 4.3.6 的機種。
- 由於往後系統核心更新的限制,QTS 4.3.6 為下列 NAS 機種最後可用的 QTS 版本更新: TS-EC1679U-SAS-RP、TS-EC1679U-RP、TS-1679U-RP、TS-EC1279U-SAS-RP、TS-EC1279U-RP、TS-1279U-RP、TS-1079 Pro、TS-EC879U-RP、TS-879U-RP、TS-1270U-RP、TS-870U-RP、TS-470U-RP、TS-470U-SP、TS-879 Pro、TVS-870、TS-870 Pro、TS-870、TVS-670、TS-670 Pro、TS-670、TVS-470、TS-470 Pro、TS-470。
- 由於記憶體容量(無法擴充)與 32 位元處理器架構的限制,從 QTS 4.3.6 開始,TS-128 與 TS-228 機種不再支援 Container Station 以及所有相依的應用程式,包含 Notes Station 3、Qcontactz、QcalAgent、AWS Greengrass、QIoT Suite Lite。

[修復問題]
- 修正 Samba 中的權限提高漏洞,這會導致未經驗證的網域接管發生 (CVE-2020-1472)。

[已知問題]
- TR-002 外接 RAID 裝置連接到 NAS 上的 USB 3.1 Gen2 埠時,匯流排類型在 QTS UI 中會錯誤地顯示為 USB 3.0。這只是 UI 的問題,資料實際上會以 USB 3.1 Gen2 速度傳輸。
- 接收來自 QNAP 外接 RAID 裝置的資料,或對其傳送資料時,RAID 群組降級後的狀態變更,可能不會立即顯示在「儲存與快照總管」中。
- 若外接 RAID 群組在降級模式下,讀/寫效能將大幅降低。
- 故障的外接 RAID 群組狀態可能會顯示為「未知」而非「故障」。
QTS 4.3.6.1620
build 20210322

[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro.

- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update. Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php

- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.6: (1) Kernel 3.10.20: TS-128, TS-228 (2) Kernel 3.2.26: TS-x31, TS-x31U (3) Kernel 4.2.8: all other models supported by QTS 4.3.6
- Due to the limitations of future kernel updates, QTS 4.3.6 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.6, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.

[Security Updates]
- Fixed a command injection vulnerability (CVE-2020-2509).
- Fixed a vulnerability in Apache HTTP server (CVE-2020-9490).

[Known Issues]
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage & Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
關閉廣告
文章分享
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 15)

今日熱門文章 網友點擊推薦!