Olight S10可鎖定。 .......a lock-out mode to prevent accidental activation http://olightworld.com/product/s10-l2-baton/?bc=5 Note that the S10 has a revised "soft lock-out" mode now - if you hold the switch down from off for >2 secs, the light shuts itself off (i.e., after one second of the Moonlight mode). You will not be able to use the light until you unlock it (by pressing-and-holding the switch for >2secs again). Note that this means that if you want Moonlight, you must release the switch before the lock-out takes effect (hold the switch between 1 and 2 secs). To unlock, simply press and hold the switch for more than 1 sec now. http://www.candlepowerforums.com/vb/showthread.php?369769-Olight-S10-L2-(S10-2013-XM-L2-1xCR123A-RCR)-Review-RUNTIMES-BEAMSHOTS-VIDEO 不過我個人認為,由於側按突出,雖可上鎖,也容易誤觸解鎖, 最好是能像S10R一樣改成不突出的側按。
看到你在問Olight S10的鎖定,可以看看Olight S10R, 有把側邊按鈕改成不突出,連充電器一起賣。 http://olightworld.com/product/s10r-baton-2/ 還有它的磁鐵好像不能拿掉。 http://www.candlepowerforums.com/vb/showthread.php?394121 The R-series tailcaps have been re-designed with a new charging dock feature – but otherwise functions as before. The S10R uses the same square-cut screw threads as before, still anodized for tail lock-out. Light can tailstand, and there is a split-ring/lanyard attachment hole on the side of the tail cap as before. And the tailcap still has a strong magnet, to allow the light to stand horizontally off any vertical metal surface. That said, I don't find the magnet quite as powerful as before. This means you may not be able to get the S10R to hold as stably off a small piece of metal (like a screw head on plastic plate cover, for example). It also does not seem to be removable now, as it is integral to how the charger functions.