用了兩年多第一次壞掉,出現「工具手把22」的圖示,不知道有沒有人有過經驗的,謝謝。
JacobHuang wrote:
用了兩年多第一次壞...(恕刪)
在使用說明書裡
那個紅色圖示已是最後一個 手鉗表示需要維修了 maintenance
確定 你所有的零件都有確實裝好!!!!!!!!!!沒有東西阻塞!
試試關機器後 三十秒後 再度開機 (重複此步驟兩到三次)
若沒有用 就要送維修站了
或服務熱線 問問 error code: 22 的問題出在哪裡
Turn off the machine. After 30 seconds, turn it on again. Try this 2 or 3 times.
If the machine does not start, contact the Philips SAECO hotline in your
country and communicate the the Error-code which you see on the display.
You can find its contact details in the warranty booklet by-packed separately
or on www.philips.com/support.
rex560810 wrote:
年初的時候,我也是...(恕刪)
感謝分享
真是有錢人玩的 可以喝多少杯星巴克啊~~~~~
看樣子 這東西不能買!
連清理都無法!
錯誤一 清理步驟如下:
只擔心 他們懶 讓你直接換配件較快
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
E01 (grinder blocked):
Some ground coffee is blocking the coffee funnel inside the machine because it cannot be transported to the brew group.
To unblock the grinder you need to take out the brew group and clean the coffee funnel with a spoon handle.
Turn OFF the machine and set the power switch on the back to the “O” position.
Remove the drip tray and empty the coffee grounds drawer. Open the service door.
Press the PUSH button and remove the brew group.
Clean the coffee funnel thoroughly with a spoon handle.
Thoroughly rinse the brew group with lukewarm water and carefully clean the upper filter.
Let the brew group air-dry thoroughly.
Clean the inside of the machine, reinsert the brew group and co¬ffee grounds drawer.
Important! If the brew group does not stand in the rest position, it cannot be reinserted.
See info below how to set the brew group in the rest position explained in E03/E04 (Brew Group).
Close the service door.
http://www.p4c.philips.com/cgi-bin/cpindex.pl?ctn=HD8761/01&dct=QAD&faqview=1&refdisplay=E38_MINUTO2_ERRORCODE_103884&refnr=0103884&scy=BE&slg=AEN
關閉廣告