另外有個"設定方式"請教, 大多數BD電影片都有內建DTS HD MASTER 5.1音效, 所以616我都是切"DIRECT(616面板有小紅字顯示接收到dts HD master, 也確實有環繞效果), 並沒有切至"DTS HD MASTER(切到這邊, 應該是經過616再處理一次, 感覺怪怪地)", 不知這樣對不對!?
AV不同步, 我目前在103裡面是設定20mS, 因為按原文說法, 聲音快, 要設+, 原文如下: The negative adjustment values are for cancelling out the audio delay that the player automatically applies. Depending on the video source and the time it takes to process the video, the main decoder chip automatically applies an audio delay in order to optimize audio video synchronization. The negative manual settings reduce the automatic audio delay, while the positive manual settings apply additional delay. Any negative value setting beyond the player's automatic delay will be treated as completely cancelling the automatic delay. For example, if the "A/V Sync" value is manually set to -100ms and for the current video source the player applies a 70ms automatic audio delay, the final result is that the 70ms audio delay gets cancelled and the audio is not delayed at all. It is not possible to put audio ahead of video using this setting.