重點是Moto Driver 32/64 bit版本要裝對
root過程請參考以下畫面:
C:\Milestone 3\Easy Rooting Toolkit\root\DooMLoRD_v1_ROOT-zergRush-busybox-su>runme.bat
---------------------------------------------------------------
Easy rooting toolkit (v1.0)
created by DooMLoRD
using exploit zergRush (Revolutionary Team)
Credits go to all those involved in making this possible!
---------------------------------------------------------------
[*] This script will:
(1) root ur device using zergRush exploit
(2) install Busybox (1.18.4)
(3) install SU files (3.0.5)
[*] Before u begin:
(1) make sure u have installed adb drivers for ur device
(2) enable "USB DEBUGGING"
from (Menu\Settings\Applications\Development)
(3) enable "UNKNOWN SOURCES"
from (Menu\Settings\Applications)
(4) [OPTIONAL] increase screen timeout to 10 minutes
(5) connect USB cable to PHONE and then connect to PC
(6) skip "PC Companion Software" prompt on device
---------------------------------------------------------------
CONFIRM ALL THE ABOVE THEN
Press any key to continue . . .
--- STARTING ----
--- WAITING FOR DEVICE
--- cleaning
rm failed for *, No such file or directory
--- pushing zergRush"
2046 KB/s (23052 bytes in 0.011s)
--- correcting permissions
--- executing zergRush
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a GingerBread ! 0x00016118
[*] Scooting ...
[*] Sending 149 zerglings ...
[*] Sending 189 zerglings ...
[+] Zerglings found a way to enter ! 0x18
[+] Overseer found a path ! 0x000161e0
[*] Sending 189 zerglings ...
[+] Zerglings caused crash (good news): 0x40122cd4 0x0074
[*] Researching Metabolic Boost ...
[+] Speedlings on the go ! 0xafd25ac9 0xafd397f7
[*] Sending 181 zerglings ...
[+] Rush did it ! It's a GG, man !
[+] Killing ADB and restarting as root... enjoy!
--- WAITING FOR DEVICE TO RECONNECT
if it gets stuck over here for a long time then try:
disconnect usb cable and reconnect it
toggle "USB DEBUGGING" (first disable it then enable it)
--- DEVICE FOUND
--- pushing busybox
3008 KB/s (1075144 bytes in 0.349s)
--- correcting permissions
--- remounting /system
--- copying busybox to /system/xbin/
2099+1 records in
2099+1 records out
1075144 bytes transferred in 0.108 secs (9955037 bytes/sec)
--- correcting ownership
--- correcting permissions
--- installing busybox
--- pushing SU binary
1447 KB/s (22228 bytes in 0.015s)
--- correcting ownership
--- correcting permissions
--- correcting symlinks
--- pushing Superuser app
2565 KB/s (762010 bytes in 0.290s)
--- cleaning
--- rebooting
ALL DONE!!!
Press any key to continue . . .
因為你提到第三步驟不一定要做,所以真有的差別只在於「把ro.HOME_APP_ADJ=1」
正好想到launcherpro的設定裡有一個實驗式設定,可以讓它不被掃地出門。這樣和改上面參數好像又不大了。當然,你又提到相機也會順,可能這個參數影響所及不只有launcher…
簡單說,不是要說什麼,只是覺得覺得改得不過癮,希望這個教學能繼續下去,放出可移除的,可殺的,可凍結的…呵呵。不過也同意啦,要去改到系統檔案也實在有夠煩,買手機是拿來用不是拿來改,而且也沒什麼時間。最好是用最簡單的方法,譬如凍結來達到最高效益
sbb.gfans wrote:
我是鍵盤控,有鍵盤的...(恕刪)
hypersam wrote:
launcherpro的設定裡有一個實驗式設定,可以讓它不 把掃地出門... (恕刪)
我出門了,所以拿MS3來寫回覆
因為知道LauncherPro有這個設定
所以我改用LauncherPro,結果完全沒用
剩150M以上的記憶體,照樣相機一執行,桌面就掃地出門了
所以MS3一定有什麼隱疾,幸運地找到這個治標的方法
我的文章發表會盡量顧慮內容是否對一般用戶有風險性
方法是否困難,是否造成耗電,是否會造成社會大眾認為android是工程師才能用的手機
之後我還會寫一兩個小調整,就僅此而以
時間是等大家都root差不多的時候,也沒什麼人再投入MS3的火坑時
軟體調教這麼糟糕又不會升級的手機,我不想幫這個廠商
MS3硬體真的是很棒就是了!!!(螢幕例外,很糟糕...)
關閉廣告