ck.yueh wrote:
我以去hp那個論壇上發問了
方塊方塊不能正確顯示文字的人就是我...
但始終沒官方人員出來回應
真是...-_____________-|||
喔喔...你的post好像被刪了!!
之前是被一些新的post擠到後面, 今天早上我看時有人reply, 不過他是問說bios有沒有更新到最新版, 所以該篇post回到了第一頁的版面,
但到下午時那一篇就消失了!! 我用search也找不到!!
個人積分：2分
文章編號：99087
個人積分：0分
文章編號：99213
正如上面大大所言，我的Toshiba-M30(1.6G, 7k60, 1GB 創見512MBx2)用CPU-Z測出來的也是100MHz的frequency( 實際上數字:99.8MHz)，換上從老婆的R40拆下的1GB(創見512MBx2,DDR266)ram，CPU-Z的frequency變成 133.2MHz似乎效能應該比較好......
但是，我用PCmark2002分別測定這兩種情況的結果卻出人意料之外：
DDR333的情況:
CPU: 5272
Memory: 5179
HDD: 942
DDR266的情況:
CPU: 5242
Memory: 4695
HDD: 934
以上分數經反覆測試，誤差在50以內
不知道Memory部分為什麼會有這樣的結果？
個人積分：50分
文章編號：99246
把他電源配置改成桌上型,
CPU就會用全速跑,然後你用Sisoftware Sandra等軟體去測,
跑的是DDR333(PC2700)
但是假如是原來膝上型的設定,
你用軟體讓cpu跑全速,他的RAM測出來是200MHz
這可能跟intel cpu設定有關,
不知道大家的是不是都這樣.
我的是 Fox M620
跑3dmark2001 97xx
3dmark03 265x
GPU核心時脈 350 MHz
記憶體時脈 230MHz, DDR 460MHz
比有網友測出來G556 M10+ 128MB的還高,怪哉.
把電源線拔掉,GPU就降到 210 MHz
RAM就降到 105 MHz DDR 210 MHz
好玩耶.
平常穩又不熱,左邊散熱孔蠻屌的,cpu過熱時才會啟動,而且比我硬碟(7K60)還小聲
玩game時底座大概是顯示卡晶片那邊蠻燙的,
不過Fox設計得還不錯,後座有點小抬高,所以還有縫可以散熱,cool~
個人積分：50分
文章編號：99260
個人積分：25分
文章編號：99282
loserkingdom wrote:
你的狀況應該跟我一樣,
把他電源配置改成桌上型,
CPU就會用全速跑,然後你用Sisoftware Sandra等軟體去測,
跑的是DDR333(PC2700)
但是假如是原來膝上型的設定,
你用軟體讓cpu跑全速,他的RAM測出來是200MHz
這可能跟intel cpu設定有關,
不知道大家的是不是都這樣.
我的是 Fox M620
跑3dmark2001 97xx
3dmark03 265x
GPU核心時脈 350 MHz
記憶體時脈 230MHz, DDR 460MHz
比有網友測出來G556 M10+ 128MB的還高,怪哉.
把電源線拔掉,GPU就降到 210 MHz
RAM就降到 105 MHz DDR 210 MHz
好玩耶.
平常穩又不熱,左邊散熱孔蠻屌的,cpu過熱時才會啟動,而且比我硬碟(7K60)還小聲
玩game時底座大概是顯示卡晶片那邊蠻燙的,
不過Fox設計得還不錯,後座有點小抬高,所以還有縫可以散熱,cool~
請問你是否可以用 CPU-Z 來看看 Chipset 的版本 ? 謝謝 .
CPU-Z
個人積分：50分
文章編號：99297
個人積分：50分
文章編號：99307
個人積分：25分
文章編號：99315
個人積分：0分
文章編號：99428
個人積分：173分
文章編號：99502
AkitoLin wrote:ck.yueh wrote:
我以去hp那個論壇上發問了
方塊方塊不能正確顯示文字的人就是我...
但始終沒官方人員出來回應
真是...-_____________-|||
喔喔...你的post好像被刪了!!
之前是被一些新的post擠到後面, 今天早上我看時有人reply, 不過他是問說bios有沒有更新到最新版, 所以該篇post回到了第一頁的版面,
但到下午時那一篇就消失了!! 我用search也找不到!!
真的是低級到有剩下
真的把那個bug的問題刪了>.<
無奈小弟不會架網站...
我這還保有HP forums的回信...通知有新回覆...結果他就這樣大辣辣的刪了...好樣的!
You have asked Hewlett-Packard to notify you about the replies to this online forum discussion topic at the Business Support Site:
About NC6000 Dram frequency...
http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=344726
Someone just posted a reply to this question. There 11 in total to the question. Please visit the message by clicking the hyperlink above to get the most updated information.
If you would like to stop receiving notifications,
* go to the message and click 'Disable Notification' button there, or
* find the message in your forums profile and uncheck the selection there.
========================================================================
IF YOU ARE THE AUTHOR OF THE QUESTION:
========================================================================
When you return to view the answers, you'll have the ability to rate (on a scale of 1-10) each response you have received. Simply login and click the 'Assign Points' button next to each response. Please use the following scale when rating each response:
N/A: The answer was simply a point of clarification to my original question
1- 3: The answer didn't really help answer my question but thanks for your assistance!
4- 7: The answer helped with a portion of my question, but I still need some additional help.
8-10: The answer has solved my problem completely! Now I'm a happy camper!
** WHY SHOULD I DO THIS?: In short, here are 3 reasons why we feel this is such an important feature of HP's Business Customer Discussion Groups and that it's worth a few moments of your time:
a.) Others have taken time out to help you, so please take a moment to give them credit for the assistance they have provided.
b.) Your rating will not only help your peers earn points toward their Forums status, but will validate the quality of the solution you've received.
c.) Other readers will therefore be able understand which answer best helped solve a problem, thereby making the community knowledge being shared here that much richer.
========================================================================
Again, we appreciate your participation in the HP Business Customer Discussion Groups . Thanks for helping build a positive user community, and if you have feedback or questions about the service, please visit the 'forums feedback, usage, and help' discussion area (http://forums.itrc.hp.com/cm/FamilyHome/1,,276,00.html) and post your comments there. We will address your comments within 2 business days.
Best Regards-
Kathy, Carol and the rest of the....
HP Business Customer Discussion Groups Team http://forums.itrc.hp.com/service/forums/home.do
