[暫停使用] TW_Weather ver3.72 (02Sep2005) is out!!!

gworen wrote:

我看了一下, 目錄底下共有四個檔案:

1.jpg data.txt TW_Weather.exe vsd_setup.dll

我也有嘗試將 1.jpg data.txt 這兩個檔案刪除,
然後執行程式點選OK開始下載檔案,
這時候我去看TW_Weather 的資料夾底下確實已經有產生了 1.jpg 跟 data.txt 這兩個檔案,
但是下載完畢之後仍然顯示 no data.txt found...,

ARM.CAB跟ARMV4.CAB這兩個我都試著安裝過,
不過仍然是相同的問題存在著耶.

(謎之音: 看了那麼多人回應, 為什麼別人用都沒問題, 就你不能用啊 )
我....我....我真的不是故意找麻煩啊~~~~~~歹勢啦
真是辛苦 larrylo 跟 uk_skinner 兩位大大啦~~~


Don't worry.. Not trouble at all.

I spoke with un_skineer, he could not figure it out either. Looks like the program can not find the data.txt and 1.jpg in the folder. One possible reason was one of the code might not "perform" well in ppc2002 even with ".Net". He will try to see he can find alternative code to work around.

Edit:

I checked the .Net site in your post, it was only SP2. Maybe you should try the SP3. Here is the link.
這個軟體真的不錯,感謝分享!
我發生一個狀況,詳述如下:

我用的是HP ipaq6365,用wifi上網,因辦公室的無線網路需要先登入後才能使用,未登入前,我的ppc是可以偵測到無線網路的!
此時我若執行氣象資料更新時,會發生錯誤,訊息如下:

"未預期的例外發生
TW_Weather.exe
請選擇離開..."


查看詳細資料,訊息如下,

TW_Weather.exe
ArgumentExcetion

Application:Run+Off
Form1:Main+0xa

此後,若完成入網路,在開啟TW_Weather仍舊會得到上述相同的訊息!

查看兩個資料檔:
1.jpg,檔案大小變成125B,沒有呈現台灣雷達圖
data.txt,檔案大小也是125B,資料如下:

html
meta http-equiv="pragma" content="no-cache"
body onload="location.href='/servlets/user.loadpage'"
/body
/html;


[抱歉,我把HTML中的"<"及">"拿掉,要不然他會被當成html執行]

若將原來解壓縮後的1.jpg及data.txt複製回去,則可正常操作!!

如果我先連好無線網路,上述的情形就不會出現囉!
chunfeng:

Sounds to me, it was the internet connection issue. I will pass this to uk_skinner to see what he thinks.

I think you need to establish internet connection first then update the information.
New version 1.02 release.

You can "Fit", "Zoom/In", "Zoom/Out" and "Reset" (go back to initial display) the image. Please download at 1st post and see the screenshot for details.
好像還不錯用喔
趕緊來試用看看
謝謝分享


cage
I have tried it, seems not bad, thanks. ^_^
我是用hp 4700,
很讚的氣象軟體,我用4700跑起來算是沒問題,
不過有個小BUG,似乎無法結束跳出!
cyzcamera wrote:
很讚的氣象軟體,我用4700跑起來算是沒問題,
不過有個小BUG,似乎無法結束跳出!


It ran fine on my hx4700 (English OS with Monster Chinese). If I don't have the Chinese system, I encountered the same problem as gworen. Sounds like you also got the same issue.

Do you use Chinese OS device? uk_skinner told me he specified "big5" encoder in the program, that probably was the reason to cause the problem. He will try to remove that code and use default one. I will upload it once he sends me.

Edit:

The 1.03 was uploaded.
好東西趕快先收下拉
感恩喔~~~
太好啦~~~~
更新 1.03版之後, 在我的E200上面總算可以正常執行了~~~

不過點了右邊的 [...] 更新資料之後,
卻發生一件慘劇.....如下圖



這種畫面很像我平常開BIG-5編碼的文件時會發生的事,
除非是用 CEbook 之類的程式來開才能正常顯示,
否則只要是用預設的 Pocket Word 來開big5文件都一樣慘不忍睹,
後來我要把中文文件丟到PDA裡面去放,
一定會先把文件轉成 unicode,
之後不管是用 CEbook 還是內建的 Pocket Word來開就ok了,
不知道上圖跟這個問題有沒有關係??
~~~* (^_^) *~~~
關閉廣告
文章分享
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 70)

今日熱門文章 網友點擊推薦!