LG G pro2 或G3的 ROOT新方法 (無論Android 5.0、4.4可以用,免降級)

感謝香港人製作影片教學 :
「【首發教學】LG G Flex 2 ROOT 教學,G3/G2/G Flex Android 5.0 通用 - FlashingDroid」:https://youtu.be/et3e8gkyqUw
~~~~~~~~~~~~~~~~~~~~~~
LG 新的方法 可以ROOT~( XDA 神人提供新方法~)
去訪問→
New Root Method for LG Devices
(有提供圖片教學 很好懂)

終於不用降級4.4 root再刷5.0包了。

---
1.下載
下載root.zip (google雲端硬碟

2.下載 LG Drivers 驅動程式(請自行尋找你的手機型號。第一次安裝驅動程式的人去裝)
ps:如果有安裝過驅動程式,連接電腦ok,就不必再找驅動程式,可忽略這點。)

3.) A micro USB cable connected to your PC
=====

1. 下載好的root.zip 解壓後↓ 參考

LG G pro2 或G3的 ROOT新方法 (無論Android 5.0、4.4可以用,免降級)

2.) Enable ADB debugging on your device

Go to Settings > About Phone > Software Information and tap build number until you are presented with "You are now a developer"
Exit back to Settings main screen
In Developer Options enable USB Debugging (Some devices require enabling PTP for debugging to work)
開啟開發者選項的方式,看圖 點它5下就有了。(不解釋)

LG G pro2 或G3的 ROOT新方法 (無論Android 5.0、4.4可以用,免降級)

手機的開發者選項→ 打開"usb偵錯"。 還有改成 傳送圖片(ptp)。 Micro USB線 接上電腦。

LG G pro2 或G3的 ROOT新方法 (無論Android 5.0、4.4可以用,免降級)

LG G pro2 或G3的 ROOT新方法 (無論Android 5.0、4.4可以用,免降級)

LG G pro2 或G3的 ROOT新方法 (無論Android 5.0、4.4可以用,免降級)

第3~第5步:請自行看xda網站有圖片教學。 不解釋。
第6步:
6.) Well that was easy , let's continue (Now that we have the files on our device we want to put our device is download mode)

(Note this method may vary from device to device)
Power off your device
When the device is powered off, hold volume up and insert a USB cable connected to the PC
Wait for the drivers to install

確認手機關機後, 按住音量上鍵 跟 usb 插上電腦。
會出現 download 模式畫面。

8.) Let's find which COM port our device is connected to

Double click ports.bat (This will give us the COM port in which our device is connected we are looking for the Diag port)

You may exit this command prompt when you have your COM port number, keep the other command prompt open

例如每台電腦不一樣的com (數字xx)。

LG G pro2 或G3的 ROOT新方法 (無論Android 5.0、4.4可以用,免降級)

第9:原作者的電腦是COM4、 不要跟他一樣。 參考我的電腦顯示是10。(注意,每台電腦的COM 不一樣~)
9.) Let's Begin! (Keep the device in Download mode)

Let's run Send_Command.exe (It couldn't connect? Make sure you COM port number is correct it varies)
Code:
Send_Command.exe \\.\COM4

參考我的圖:
LG G pro2 或G3的 ROOT新方法 (無論Android 5.0、4.4可以用,免降級)


第10:重拔電池後,手機開機,有看到app"Supersu" 表示成功。

LG G pro2 或G3的 ROOT新方法 (無論Android 5.0、4.4可以用,免降級)


雖然這些方法… 較適合有懂視窗的CMD指令碼...可以試試。 若不懂對電腦基礙的人..我懶得說,不要去弄ROOT。
祝大家的手機 ROOT順利~~

可以root的機型↓
Devices confirmed working with root method
•LG F60 (all variants)
•LG Tribute (all variants)
•LG G2 (all variants)
•LG MS395/D393
•LG G3 (all variants)
• LG L90 (all variants)
•LG Transpyre
• LG Volt (LS740)
謝謝分享 收下囉
pei621 wrote:
LG 新的方法 可...(恕刪)
收下了,感謝分享新ROOT方式.151515151

pei621 wrote:
LG 新的方法 可...(恕刪)


雖然我沒有 LG 手機


G3 V20h 成功了!!

這個方法簡單多了

謝謝轉


pei621 wrote:
LG 新的方法 可...(恕刪)
感謝大大root成功了
pei621 wrote:
LG 新的方法 可...(恕刪)
pei621 wrote:
LG 新的方法 可...(恕刪)




G3 台版20H 5.0 ROOT成功,讚

pei621 wrote:
LG 新的方法 可...(恕刪)

奇怪不知道哪裡步驟出了問題都不會像樓主一樣出現第9步驟的圖片那樣子
謝謝大大 G pro2 台版20c 5.0 ROOT成功
啾是耍心機 wrote:
奇怪不知道哪裡步驟出...(恕刪)


我猜你沒看到xda 第8步驟…

Double click "ports.bat"..
要打開 ports.bat
查看第二行的com xx(數字)


第9步:


知道電腦的comxx (xx數字)
貼上Send_Command.exe \\.\COM(數字)
然後 再貼上sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox
參考↓


跑完↓ 就ok了。 拔掉usb線、再重拔電池。 手機開機。有看到supersu 完結。
關閉廣告
文章分享
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 10)

今日熱門文章 網友點擊推薦!