Acer Liquid 2.1 1.100.09 刷機包

Hi everyone , I am a new joiner of android
I have a stupid question , hope anyone can help
after install malez recovery 0.5.3
then I can boot the phone with the malez start screen,
but then the phone reboot in normal mode
is there any key I need to press or anyting I do wrong,
Pls Help

Thanks for the answer
toystory wrote:
Hi everyon...(恕刪)


Hello,

Press [volume -] + [camera] + [power] to enter the recovery mode. usually the right combination comes with triple vibration before the boot screen of malezrecovery is loaded

Also, make sure to press the power button at latest in order to increase the chance to boot into the recorvery mode
thanks for the reply
have try but with no luck
can I use the quickboot app to do the same thing
or does my rom is still donut 1.6 (rooted) make it the problem

Use quickboot recovery mode
I can see the malex start screen but then reboot to normal mode again
sos!!

1.100.05_superboot.img 試了好幾種方式都刷不上!?

使用
echo Flashing Superboot...
adb-windows.exe reboot bootloader
fastboot-windows.exe -i 0x0502 flash boot 1.100.05_superboot.img
echo Rebooting...
fastboot-windows.exe -i 0x0502 reboot

之後,手機的反應是重新開機了…但也是進到了bootloader 的模式下
(是上方有白色帶狀的一直在跑…)
抽掉usb,再開機,還是一樣……
toystory wrote:
thanks for...(恕刪)


check this

The recovery images will not work on factory AAP, CSL or FET devices untill you do a full flash An updgrade via acer download tools is needed. You will have to flash to an EMEA rom (thanks to Nova2.1 for his help)

plz check your bin version, I think this is the answer that you're looking for
漂流冰山 wrote:
sos!!1.100...(恕刪)


如果你是要刷1.100.09,請參考一下第20篇回文!一步一步來應該會有用的
do anybody can help
Just use the acer download tools to update the rom
but there was a power suspend in my house
and now the phone stop at the bootloader even I restart it
is there anything i can do pls help
reboot the phone with usb plug
stop in bootloader with usb_init

when unplug the usb
stop with message
usb
poweroff charging

toystory wrote:
reboot the...(恕刪)


Well, flash the malezrecovery in the fastboot, if u don't know how to do it plz check the reply #20 in this post for the command and ignore the line with superboot. Then u should be able to enter the recovery mode by following the key combination that I've mentioned above, next just use the acer download tool to flash the bin again.
關閉廣告
文章分享
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 7)

今日熱門文章 網友點擊推薦!