可以加一個"不要回應ping"的功能嗎?
我把NAS直接聯網,沒經過分享器,就看到一堆人在試密碼.
不要回應ping應該可以減少被測試的機會.謝謝.
whiskey1219 wrote:
可以加一個"不要回應ping...(恕刪)

什麼意思?
單車小王子 wrote:
什麼意思?(恕刪)


很多的IP分享器都有類似的功能.
減少被無聊人士測試的機會.
QTS 4.3.6.1446 build 20200929

[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update. Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.6: (1) Kernel 3.10.20: TS-128, TS-228 (2) Kernel 3.2.26: TS-x31, TS-x31U (3) Kernel 4.2.8: all other models supported by QTS 4.3.6

- Due to the limitations of future kernel updates, QTS 4.3.6 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.6, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.

[Fixed Issues]
- Fixed an elevation of privilege vulnerability in Samba that could cause unauthenticated domain takeover (CVE-2020-1472).

[Known Issues]
- When a TR-002 external RAID enclosure is connected to a USB 3.1 Gen2 port on the NAS, the bus type incorrectly appears as USB 3.0 in the QTS UI. This is a UI problem only, data will actually be transferred at USB 3.1 Gen2 speeds.
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage & Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
- A failed external RAID group may have the status "Unknown" instead of "Failed".
QTS 4.3.6.1620
build 20210322

[重要事項]
- 為確保系統順利運作,更新 QTS 版本至 4.3.6 後,請在 App Center 一併更新 Container Station 版本至 1.9,再重新啟用 QVR Pro。

- 原 RADVD 功能不提供對外連線設定,請於更新後重新設定 RADVD 功能。
- 基於安全考量,不再支援 Wi-Fi ad-hoc 模式。
- 對於搭載 Annapurna Labs 處理器的 ARM 機種,此次 QTS 更新會將系統儲存區的檔案系統升級為 ext4。為了確保您的資料安全,在此次更新後,您將無法將 QTS 降級至先前版本。影響機種:TS-131P、TS-231P、TS-431P、TS-531P、TS-231+、TS-431+、TS-231P2、TS-431P2、TS-431X、TS-431X2、TS-531X、TS-831X、TS-1231XU-RP、TS-1231XU、TS-831XU-RP、TS-831XU、TS-431XU-RP、TS-431XU、TS-431XeU、TS-1635。
- 支援其他機種的 QTS 作業系統將陸續推出。QTS 更新及服務支援狀況,請參考產品支援狀態列表
(https://www.qnap.com/en/product/eol.php)。

- QTS 4.3.x 安裝於搭載 64 位元 Intel 或 AMD 處理器的 NAS 機種時,可能不支援部分應用程式。若要檢測 NAS 上安裝的應用程式是否相容於 QTS 4.3.x,請下載 QTS 64 位元相容性檢測工具,並安裝至您目前版本的 QTS。(https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- QTS 4.3.6 支援機種所搭載的 kernel 版本如下:(1) Kernel 3.10.20:TS-128、TS-228 (2) Kernel 3.2.26:TS-x31、TS-x31U (3) Kernel 4.2.8:所有其餘支援 QTS 4.3.6 的機種。
- 由於往後系統核心更新的限制,QTS 4.3.6 為下列 NAS 機種最後可用的 QTS 版本更新: TS-EC1679U-SAS-RP、TS-EC1679U-RP、TS-1679U-RP、TS-EC1279U-SAS-RP、TS-EC1279U-RP、TS-1279U-RP、TS-1079 Pro、TS-EC879U-RP、TS-879U-RP、TS-1270U-RP、TS-870U-RP、TS-470U-RP、TS-470U-SP、TS-879 Pro、TVS-870、TS-870 Pro、TS-870、TVS-670、TS-670 Pro、TS-670、TVS-470、TS-470 Pro、TS-470。
- 由於記憶體容量(無法擴充)與 32 位元處理器架構的限制,從 QTS 4.3.6 開始,TS-128 與 TS-228 機種不再支援 Container Station 以及所有相依的應用程式,包含 Notes Station 3、Qcontactz、QcalAgent、AWS Greengrass、QIoT Suite Lite。

[安全更新]
- 修正命令注入漏洞 (CVE-2020-2509)。
- 修復 Apache HTTP Server 中的漏洞 (CVE-2020-9490)。

[已知問題]
- 接收來自 QNAP 外接 RAID 裝置的資料,或對其傳送資料時,RAID 群組降級後的狀態變更,可能不會立即顯示在「儲存與快照總管」中。
- 若外接 RAID 群組在降級模式下,讀/寫效能將大幅降低。
QTS 4.3.6.1663
build 20210504

[重要事項]
- 為確保系統順利運作,更新 QTS 版本至 4.3.6 後,請在 App Center 一併更新 Container Station 版本至 1.9,再重新啟用 QVR Pro。
- 原 RADVD 功能不提供對外連線設定,請於更新後重新設定 RADVD 功能。
- 基於安全考量,不再支援 Wi-Fi ad-hoc 模式。
- 對於搭載 Annapurna Labs 處理器的 ARM 機種,此次 QTS 更新會將系統儲存區的檔案系統升級為 ext4。為了確保您的資料安全,在此次更新後,您將無法將 QTS 降級至先前版本。影響機種:TS-131P、TS-231P、TS-431P、TS-531P、TS-231+、TS-431+、TS-231P2、TS-431P2、TS-431X、TS-431X2、TS-531X、TS-831X、TS-1231XU-RP、TS-1231XU、TS-831XU-RP、TS-831XU、TS-431XU-RP、TS-431XU、TS-431XeU、TS-1635。
- 支援其他機種的 QTS 作業系統將陸續推出。QTS 更新及服務支援狀況,請參考產品支援狀態列表(https://www.qnap.com/en/product/eol.php)。
- QTS 4.3.x 安裝於搭載 64 位元 Intel 或 AMD 處理器的 NAS 機種時,可能不支援部分應用程式。若要檢測 NAS 上安裝的應用程式是否相容於 QTS 4.3.x,請下載 QTS 64 位元相容性檢測工具,並安裝至您目前版本的 QTS。(https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- QTS 4.3.6 支援機種所搭載的 kernel 版本如下:(1) Kernel 3.10.20:TS-128、TS-228 (2) Kernel 3.2.26:TS-x31、TS-x31U (3) Kernel 4.2.8:所有其餘支援 QTS 4.3.6 的機種。
- 由於往後系統核心更新的限制,QTS 4.3.6 為下列 NAS 機種最後可用的 QTS 版本更新: TS-EC1679U-SAS-RP、TS-EC1679U-RP、TS-1679U-RP、TS-EC1279U-SAS-RP、TS-EC1279U-RP、TS-1279U-RP、TS-1079 Pro、TS-EC879U-RP、TS-879U-RP、TS-1270U-RP、TS-870U-RP、TS-470U-RP、TS-470U-SP、TS-879 Pro、TVS-870、TS-870 Pro、TS-870、TVS-670、TS-670 Pro、TS-670、TVS-470、TS-470 Pro、TS-470。
- 由於記憶體容量(無法擴充)與 32 位元處理器架構的限制,從 QTS 4.3.6 開始,TS-128 與 TS-228 機種不再支援 Container Station 以及所有相依的應用程式,包含 Notes Station 3、Qcontactz、QcalAgent、AWS Greengrass、QIoT Suite Lite。

[安全更新]
- 修正安全性問題。

[已知問題]
- 接收來自 QNAP 外接 RAID 裝置的資料,或對其傳送資料時,RAID 群組降級後的狀態變更,可能不會立即顯示在「儲存與快照總管」中。
- 若外接 RAID 群組在降級模式下,讀/寫效能將大幅降低。
QTS 4.3.6.1711
build 20210621

[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.

- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update. Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.6: (1) Kernel 3.10.20: TS-128, TS-228 (2) Kernel 3.2.26: TS-x31, TS-x31U (3) Kernel 4.2.8: all other models supported by QTS 4.3.6
- Due to the limitations of future kernel updates, QTS 4.3.6 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.6, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.

[Security Updates]
- Fixed some minor security issues.

[Known Issues]
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage & Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
QTS 4.3.6.1831

build 20211019

[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update. Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.6: (1) Kernel 3.10.20: TS-128, TS-228 (2) Kernel 3.2.26: TS-x31, TS-x31U (3) Kernel 4.2.8: all other models supported by QTS 4.3.6
- Due to the limitations of future kernel updates, QTS 4.3.6 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.6, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.

[Security Updates]
- Fixed a security issue.

[Known Issues]
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage & Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
QTS 4.3.6.1907
build 20220103

[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update. Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.6: (1) Kernel 3.10.20: TS-128, TS-228 (2) Kernel 3.2.26: TS-x31, TS-x31U (3) Kernel 4.2.8: all other models supported by QTS 4.3.6
- Due to the limitations of future kernel updates, QTS 4.3.6 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.6, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.

[Security Updates]
- Fixed a security issue (CVE-2020-25717).

[Known Issues]
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage & Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
QTS 4.3.6.1907
build 20220103

[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update. Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.6: (1) Kernel 3.10.20: TS-128, TS-228 (2) Kernel 3.2.26: TS-x31, TS-x31U (3) Kernel 4.2.8: all other models supported by QTS 4.3.6
- Due to the limitations of future kernel updates, QTS 4.3.6 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.6, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.

[Security Updates]
- Fixed a security issue (CVE-2020-25717).

[Known Issues]
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage & Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
關閉廣告
文章分享
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 23)

今日熱門文章 網友點擊推薦!