Synology DSM 6.X 正式版 Release Notes 發佈通知


foreignbuyer wrote:
Version: 6.2.1-23824
(2018-10-30)...(恕刪)


這個版本 編號 比上個版本 還舊,不知道甚麼時候 群暉科技 可以取消 不能降版 的檢查機制。
Version: 6.2.1-23824-2
(2018-12-11)

Important Note
This update is available for manual download. Go to Download Center and select the patch for your model.
This update will restart your Synology NAS.

Fixed Issues
Fixed an issue where the SSD cache auto-protection mechanism was not able to start automatically.
Fixed an issue where installing package creates unnecessary package backup that occupies system space.
Version: 6.2.1-23824-3
(2018-12-21)

Important Note
This update is available for manual download. Go to Download Center and select the patch for your model.
This update will restart your Synology NAS.

Fixed Issues
Fixed a security vulnerability regarding Netatalk (Synology-SA-18:62).
Version: 6.2.1-23824-4
(2018-12-27)

Important Note

The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
This update will restart your Synology NAS.

Fixed Issues
Fixed a security vulnerability (Synology-SA-18:64).
Version: 6.2.1-23824-6
(2019-02-19)

Important Note

The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

This update will restart your Synology NAS if you are using the models listed below.
Plus Series : DS218+, DS718+, DS918+, DS1019+
Value Series : DS418play

Fixed Issues
Fixed an issue where abnormal reboot while converting SHR type or expanding SHR capacity may cause the storage volume not to be properly mounted.
Fixed an issue where the completion of Snapshot Replication under high load environment may result in abnormal reboot.

Minor bug fixes.
foreignbuyer wrote:Version: 6...(恕刪)


多謝分享.

也有中文版本的.

版本: 6.2.1-23824-6


(2019-02-19)
注意事項
  1. 此更新預計在數天內發佈至所有地區,但各地區的實際發佈時間可能略有不同。
  2. 若您使用的是下列機種,此更新將重新啟動您的 Synology NAS。
    • Plus 系列 : DS218+, DS718+, DS918+, DS1019+
    • Value 系列 : DS418play
問題修正
  1. 修正當轉換 SHR 類型或擴充 SHR 時,若系統異常的重新啟動,可能造成儲存空間無法正確掛載的問題。
  2. 修正在系統高負載的環境下,快照複寫結束時可能導致系統異常重新啟動的問題。
  3. 修正其他問題。
FB: Pctine
Version: 6.2.2-24922
(2019-03-28)

Important Note

This update is now available for manual download. Go to Download Center and select the patch for your model.
The update is expected to be available for all regions within the next few weeks, although the time of release in each region may vary slightly.
This update will restart your Synology NAS.
sMedio DTCP Move package is currently incompatible with DSM 6.2.2. This will be fixed in the next version of the package.
If MariaDB 5 is not installed and the built-in MySQL port is selected for a firewall rule, users will have to enable the option again.
What's New in DSM 6.2.2

Added the new Smart Update function and adjusted the update mechanism of DSM.
IHM now supports 14TB IronWolf and IronWolf Pro drives.
Added firmware update function of SAS controller on certain SAS models.
Added knowledge base article recommendations in the Support Center to help users with easy troubleshooting.
Domain users can now change their passwords upon DSM login when their passwords expire.
Added support for Integrated Windows Authentication.
Added support for Google LDAP services.
Added the new Low-Capacity Write function, which resumes LUNs from read-only status temporarily when a volume is running out of space.
Users can now select which advanced features to enable during iSCSI LUN creation.
Adjusted the warning mechanism in iSCSI Manager for insufficient volume space.
Users can now set up trigger time for snapshot retention policies in iSCSI Manager.
Users can now configure date and time formats in their personal account settings.
Supports SSD compatibility check on XS and FS series models.
Adjusted the notification mechanism for bad sectors.
Improved the calculating accuracy of SSD cache hit rate.
Users can now get a Let's Encrypt certificate automatically upon adding a new Synology DDNS.
Changed notification badges from numbers to red dots and modified display rules.
Fixed Issues

Fixed an issue where usage history may not show in Resource Monitor on certain models.
Fixed an issue where files cannot be re-uploaded after being deleted on macOS 10.13.
Fixed an issue where encrypted Excel files cannot be opened in Microsoft Office 2016 simultaneously on multiple macOS devices.
Shortened the time needed for domain and LDAP authentication via AFP.
Improved the stability of mounting exFAT external devices (exFAT package required).
Improved the stability of NFS protocol connection.
Improved the stability of Snapshot Replication when moving a large number of directories.
Enhanced the stability of Btrfs file system under certain high I/O loading conditions.
Enhanced vulnerabilities protection from KPTI to Spectre and Meltdown Protection for improved security. Applied models:
18-Series : DS218+, DS418play, DS718+, DS918+, DS1618+, DS3018xs, RS2418+, RS2418RP+, RS2818RP+, FS1018
19-Series : DS1019+, DS1819+, DS2419+, RS1619xs+
Fixed multiple security vulnerabilities regarding Linux kernel (CVE-2017-13168, CVE-2018-19824, CVE-2017-15649, CVE-2018-14634, CVE-2018-17182, CVE-2018-10853).
Fixed multiple security vulnerabilities regarding OpenSSL (CVE-2018-0732, CVE-2018-0737, CVE-2019-1559, CVE-2018-0734, CVE-2018-5407).
Fixed multiple security vulnerabilities regarding Spectre & Meltdown (Synology-SA-18:01).
Fixed multiple security vulnerabilities regarding OpenSSH (CVE-2019-6109, CVE-2019-6110, CVE-2019-6111, CVE-2018-20685).
Fixed a security vulnerability regarding SQLite (Synology-SA-18:61).
Fixed multiple security vulnerabilities regarding Samba (Synology-SA-18:47, Synology-SA-18:60).
Minor bug fixes.
Version: 6.2.2-24922
(2019-04-29)

Important Note

The update is expected to be available for all regions within the next few weeks, although the time of release in each region may vary slightly.
This update (repacked) was released on Apr. 29 to fine-tune the functionality and usability.
This update will restart your Synology NAS.

What's New in DSM 6.2.2

Added the new Smart Update function and adjusted the update mechanism of DSM.
IHM now supports 14TB IronWolf and IronWolf Pro drives.
Added firmware update function of SAS controller on certain SAS models.
Added knowledge base article recommendations in the Support Center to help users with easy troubleshooting.
Domain users can now change their passwords upon DSM login when their passwords expire.
Added support for Integrated Windows Authentication.
Added support for Google LDAP services.
Added the new Low-Capacity Write function, which resumes LUNs from read-only status temporarily when a volume is running out of space.
Users can now select which advanced features to enable during iSCSI LUN creation.
Adjusted the warning mechanism in iSCSI Manager for insufficient volume space.
Added function to schedule the snapshot rotation in iSCSI Manager.
Added support for the configuration of date and time formats in personal account settings and Control Panel.
Supports SSD compatibility check on XS and FS series models.
Adjusted the notification mechanism for bad sectors.
Improved the calculating accuracy of SSD cache hit rate.
Users can now get a Let's Encrypt certificate automatically upon adding a new Synology DDNS.
Changed notification badges from numbers to red dots and modified display rules.
Fixed Issues

Fixed an issue where usage history may not show in Resource Monitor on certain models.
Fixed an issue where files cannot be re-uploaded after being deleted on macOS 10.13.
Fixed an issue where encrypted Excel files cannot be opened in Microsoft Office 2016 simultaneously on multiple macOS devices.
Shortened the time needed for domain and LDAP authentication via AFP.
Improved the stability of mounting exFAT external devices (exFAT package required).
Improved the stability of NFS protocol connection.
Improved the stability of Snapshot Replication when moving a large number of directories.
Enhanced the stability of Btrfs file system under certain high I/O loading conditions.
Enhanced vulnerabilities protection from KPTI to Spectre and Meltdown Protection for improved security. Applied models:
18-Series : DS218+, DS418play, DS718+, DS918+, DS1618+, DS3018xs, RS2418+, RS2418RP+, RS2818RP+, FS1018
19-Series : DS1019+, DS1819+, DS2419+, RS1619xs+
Fixed multiple security vulnerabilities regarding Linux kernel (CVE-2017-13168, CVE-2018-19824, CVE-2017-15649, CVE-2018-14634, CVE-2018-17182, CVE-2018-10853).
Fixed multiple security vulnerabilities regarding OpenSSL (CVE-2018-0732, CVE-2018-0737, CVE-2019-1559, CVE-2018-0734, CVE-2018-5407).
Fixed multiple security vulnerabilities regarding Spectre & Meltdown (Synology-SA-18:01).
Fixed multiple security vulnerabilities regarding OpenSSH (CVE-2019-6109, CVE-2019-6110, CVE-2019-6111, CVE-2018-20685).
Fixed a security vulnerability regarding SQLite (Synology-SA-18:61).
Fixed multiple security vulnerabilities regarding Samba (Synology-SA-18:47, Synology-SA-18:60).
Minor bug fixes.
7.0好像還沒要上?
vista96 wrote:
這個版本 編號 比...(恕刪)
版本: 6.2.2-24922-1
(2019-06-11)
注意事項

此更新預計在數天內發佈至所有地區,但各地區的實際發佈時間可能略有不同。
此更新將會重新啟動您的 Synology NAS。
問題修正

修正控制台與通知可能無法顯示有 DSM 版本更新的問題。
修正網域使用者可能無法在登入 DSM 時修改密碼的問題。
修正將 DSM 加入 LDAP 伺服器可能失敗的問題。
修正啟用轉換 Mac 特殊字元的功能後,存取含有特殊字元的路徑可能會導致權限錯誤的問題。
修正因套件中心重設檔案權限而導致部份套件功能失效的問題。
加強 Btrfs 檔案系統在特定高 I/O 負載環境下的穩定性。
修正重新啟動後,不斷電系統功能有極小的機會可能被停用的問題。
修正在網路不穩時,File Station 透過 CIFS 重新連線可能失敗的問題。
修改系統日期與時間格式設定的預設選項分別為 YYYY-MM-dd 與 HH:mm。
修正有關 Samba 的安全性弱點 (Synology-SA-19:23)。
修正有關 libxslt 的安全性弱點 (CVE-2019-11068)。
關閉廣告
文章分享
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 25)

今日熱門文章 網友點擊推薦!