[分享] 魂動 Mazda 解除原廠隱藏功能分享與討論

Please simply follow the instructions below to retry. If still no luck, leave a private message to me and I walk you through 


(1) Download and install the latest Forscan release that can be found on Forscan website
(2) On 720-04-17,
change b1 of B2 from “0” to “1” (70 --> 72) and then
change b2 of B4 from “1” to “0” (24 --> 20), finally
have the hexadecimal value of B5 minus 2 to get the new checksum (4E --> 4C)
(3) Update the global checksum on 720-04-01’s B0B1 and B5 accordingly based on the changes made above
(4) Run Forscan’s ABS Relearn / Initiation with Forscan step-by-step instructions
(5) Run Forscan’s SBS/MRCC Relearn / Initiation with Forscan step-by-step instructions
(6) Clear all DTC errors and all set


terrysad wrote:
Hello.

Ca...(恕刪)
I can not reply your private message, it not sent, just go to outbox :(
Cam you share me your skype id?
please check your message box and you should be able to see my replies now
terrysad wrote:
I can not ...(恕刪)
joewang2003 wrote:
please check...(恕刪)


new reply go to Outbox again, I think this forum have some limitations for new account and I must wait few hours to send a new message.

Did you view my Video?
請問南部有大大可以幫忙嗎?

事情是這樣的,我昨天晚上自己做了一條線,想說試著讀看看車上的電腦測試一下限是否正常。
結果,第一次連跟板上大大的不太一樣,於是關掉軟體重新連線。
之後連不上去,而發車後引擎燈亮起。

今天早上出門燈還亮著,但10點多在上車時燈就消失了。

現在有幾個問題想問
想請問,沒有更動任何數值只連線,電腦裡回原廠會有紀錄看得出來嗎??
還有就是,現在感覺都正常,我要怎麼檢查是否真的正常
最後,請問有大大可以幫我修改,速控,車道偏移導正,後煞停
先在這謝謝大家了

ps我的車是18年式尊安有mrcc
我想請問16年CX5 油耗顯示的方式能改成km/l嗎?
請問有人可以分享整個TSR的解法嗎?
影片的部分看不太懂
Hi, I must wait some times to send more messages on this forum. So please check your mazda3revolution's inbox.

Thanks

joewang2003 wrote:
please check...(恕刪)
請問J大,如何解開SCBS-F,我試著將IC碼中的720-04-24和720-04-01中的相關數值修改後,儀表板提示SBS錯誤,重做SBS/MRCC和DTS後,錯誤依舊,靜候J大解答
關閉廣告
文章分享
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 176)

今日熱門文章 網友點擊推薦!