Nikon D750 firmware version 1.10:
An External recording control option has been added to the HDMI item in the SETUP MENU. If the camera is connected via HDMI to a third-party recorder that supports the Atomos Open Protocol (the Atomos SHOGUN, NINJA2, or NINJA BLADE), selecting On allows camera controls to be used to start and stop recording. More information is available in a supplementary manual.
Note: Choose an option other than 576p (progressive) or 480p (progressive) for HDMI > Output resolution in theSETUP MENU.
Fixed the following issues:
The brightness of the live view photography display would not change when a command dial was rotated to adjust exposure compensation with On (Auto reset) selected for b Metering/exposure > b3 Easy exposure compensation > Easy exposure compensation in the CUSTOM SETTING MENU.
Although the preview button would stop the lens down to maximum aperture when assigned the Preview role, the maximum aperture indicator would not appear in the monitor.
In rare cases, the shutter would not be released when the user attempted to take photographs in movie live view.
About 4 seconds of static could be heard on audio recorded with external HDMI recorders during movie live view.
The shutter speed, aperture, and ISO sensitivity displayed in the monitor during movie live view would differ from values in the final movie file.
Part of the focus point would disappear if the user zoomed in while the framing grid was displayed.
Volume could sometimes not be adjusted if movies were played with indicators hidden during full-frame playback (None (image only)).
Exposure compensation would fail to produce the desired results if a negative value was selected when NEF (RAW) images were processed using the NEF (RAW) processing option in the RETOUCH MENU.
Images would in rare cases fail to record correctly with HDR (high dynamic range) selected in the PHOTO SHOOTING MENU.
If On was selected for Exposure smoothing during interval timer photography, every frame after the first would be overexposed.
File numbers were not assigned in the proper sequence.
The focus point would not be displayed in the correct location in the monitor.
In some languages, characters or parts of characters would be missing from the SETUP MENU > Location data > Positiondisplay.
In some languages, characters or parts of characters would be missing from the SETUP MENU > AF fine-tune > List saved values display.
In some regions, nothing would be displayed when Conformity marking was selected in the SETUP MENU.
Some help text has been changed.
Optimal vibration reduction is now available with vibration reduction lenses.
google 翻譯
尼康D750固件1.10版本:
外部錄製控制選項已被添加到設置菜單中的HDMI項目。如果相機通過HDMI連接至支持ATOMOS開放協議(該ATOMOS代將軍NINJA2,或NINJA BLADE)第三方刻錄機,選擇在允許使用相機的控制開始和停止錄製。更多信息可在補充手冊。
注:選擇在theSETUP MENU HDMI>輸出分辨率的選項比576P(逐行掃描)或480P(逐行掃描)等。
修正了以下問題:
當一個指令撥盤被旋轉來調整與在曝光補償實時取景拍攝顯示屏的亮度不會改變(自動復位)選擇對B測光/曝光> B3簡易曝光補償>在自定義設置菜單簡易曝光補償。
雖然預覽按鈕會時分配的預覽作用下停止鏡頭最大光圈,最大光圈指示將不會出現在顯示屏上。
在極少數情況下,快門就不會當用戶試圖採取在短片實時取景的照片發布。
靜態約4秒可以聽到聲音在電影現場查看記錄與外部HDMI記錄器。
快門速度,光圈和ISO在短片實時取景顯示屏中顯示的敏感性將在最後的電影文件不同的值。
如果在取景窗格中顯示的用戶放大對焦點的一部分將消失。
量能,如果電影是打了指標全屏播放過程中隱藏有時不作調整(無(僅圖像))。
曝光補償將無法產生預期的結果,如果當NEF(RAW)影像使用潤飾菜單中的NEF(RAW)處理選項進行了處理負值被選中。
在極少數情況下圖像將無法與HDR(高動態範圍)的照片拍攝菜單中選擇正確記錄。
如果在入選曝光間隔定時拍攝過程平滑,後的第一個每一幀會被過度曝光。
文件編號都沒有以正確的順序分配。
對焦點將不會被顯示在顯示屏中的正確位置。
在某些語言中,字符的字符或部件會錯過從設置菜單>的位置數據> Positiondisplay。
在某些語言中,字符的字符或部件將在設置菜單中缺少> AF微調>列表保存的值顯示。
在一些地區,沒有什麼會在符合性標誌是在設置菜單中選擇顯示。
一些幫助文本已更改。
最佳減振現已與減震鏡頭。
下載
http://downloadcenter.nikonimglib.com/en/download/fw/157.html
• 設定選單 的 HDMI 項目中已新增一個 外部記錄控制 選項。若相機透過 HDMI 連接至支援 Atomos 開放協定(Atomos SHOGUN、NINJA2 或 NINJA BLADE)的第三方記錄裝置,選擇 開啟 後,您可使用相機控制開始和停止第三方記錄裝置的記錄。有關詳情,請參見附加的說明書。
注意:請在 設定選單 中將 HDMI > 輸出解像度 選為 576p(逐行)和 480p(逐行)以外的選項。
• 已解決以下問題:
- 若在 用戶設定選單 的 b 測光/曝光 > b3 簡易曝光補償 > 簡易曝光補償 中選擇了 開啟(自動重設),當旋轉指令撥盤以調整曝光補償時,實時顯示攝影顯示的亮度不發生改變。
- 雖然預覽按鍵被指定 預覽 功能時會將鏡頭調整至最大光圈,但螢幕中不出現最大光圈指示器。
- 在少數情況下,當用戶試圖在短片實時顯示中拍攝相片時無法釋放快門。
- 在短片實時顯示過程中使用外部 HDMI 記錄裝置記錄的音頻中可能會有長約 4 秒的靜音。
- 短片實時顯示過程中顯示在螢幕上的快門速度、光圈及 ISO 感光度與最終短片檔案中的值可能不同。
- 若用戶在構圖網格顯示期間進行拉近操作,部分對焦點將會消失。
- 若在全螢幕重播短片過程中隱藏了指示器(無(僅限影像)),音量有時可能無法調整。
- 使用 修飾選單 中的 NEF(RAW)處理 選項處理 NEF(RAW)影像時若選擇了負值,曝光補償可能無法產生預期效果。
- 在少數情況下,當在 相片拍攝選單 中選擇了 HDR(高動態範圍)時,影像無法正確記錄。
- 若在間隔定時拍攝期間將 曝光平滑化 選為 開啟,首張照片後的每張照片都可能曝光過度。
- 檔案編號不按正確序列指定。
- 對焦點可能顯示在螢幕中不正確的位置。
- 在某些語言中,設定選單 > 位置資料 > 位置 顯示中的字元或部分字元會缺失。
- 在某些語言中,設定選單 > AF 微調 > 列出儲存值 顯示中的字元或部分字元會缺失。
- 在某些地區,當在 設定選單 中選擇了 合格標記 時不出現任何顯示。
• 某些說明文字已更改。
• 最佳減震功能現適用於減震鏡頭。
-----------------------------------
已更新完畢。
用相機來拍別人,也是替自己留下足跡