想請問各位大大...
因為我之前在幫WL-500gP V2更新韌體的時候更新失敗(更新太久拔電源重開就掛了= =")後來送到ASUS維修...
昨天拿回來之後發現居然變成"WL-500gP"了
明明單子上面寫得很清楚送修的是"WL-500gP V2"
回來居然變成他的上一代= ="
不知道這兩台有甚麼差別???哪一台比較好呢???
真要認真的使用,
建議用 oleg, DD-WRT, tomato 之類的
oleg 旁支版可以USB變身 3.5G router. 系統乾淨, 功能強大, 下載效率很高.
DD-WRT 可以玩可以設定的東西很多.
tomato QoS功能很好, 原本刷完USB功能失效為眾所詬病
最近也有新增對USB disk/printer 的支援.
而且這台號稱刷機最簡單, 一個 tftp 上傳 bin(or trx) 就搞定了. 要搞掛除非裡面那顆flash掛了,
或是刷機時跳電, 不然還是不太容易死機.
比起 fon 刷 DD-WRT, DIR-300刷DD-WRT.. 這台刷機容易度算是入門級的.
難是難在相關的linux系統設定
但是WL-500GP插802.11n會怎麼樣, 弟就不知了.
1.4.3. Using a different miniPCI wireless card (and Kernel 2.6)
Because the WL500W has a miniPCI port, it is possible to swap out the original Broadcom MIMO card with another card (such as an Atheros 5xxx model). The Atheros madwifi drivers are compatible with kernel 2.6 and come built in with OpenWRT. When doing a custom build, just 'make menuconfig' and select the 2.6 kernel as well as the Atheros WiFi. This has been tested and is working (OpenWRT r12384). It may even be possible to use the Madwifi r5k atheros source drivers. Remember to enable the wirless with uci (see the WL500GP page).
タケシ wrote:
自問自答一下, 這是Open-WRT關於WL-500W的敘述, 應該對WL-500GP也是適用
但是WL-500GP插802.11n會怎麼樣, 弟就不知了.
恕刪)
關於WL-500GP自行換插802.11n網卡,經網友實驗後確實可行
這裡用的韌體是以 DD-WRT v24-sp2 (09/30/09) big - build 13000M NEWD-2 Eko 版試做,網卡使用 WL-500W 上的 BCM4321L + BCM2055
參考資料:http://digiland.tw/viewtopic.php?id=902
數位天堂 http://digiland.tw/
關閉廣告